BeastX Trex 550 Cyclic swashlimit ??

[jasoncook]

Hi All as the title suggests how much movment do you put in at step L cyclic swash limit. I have taken it to the ridge on the etop of the swash ball. The heli now on update v3.08 and seems very tame. I have had to open up the AIL upto 130% to get a medium roll rate its in dir mode and could still do with a bit more ??

[waveydavey]

I leave the stick at bottom from the previous menu and max it as much as I can without binding on the main shaft. It's on a 600 in fairness, what setting in paramater b are you using.

[jasoncook]

Sorry Transmitter mode I call it dir as its direct imputs .

[waveydavey]

How much cyclic are you setting or are you doing the same as me and setting max

[jasoncook]

I am setting it 6degre ??

[jasoncook]

Just thrown the pitch gauge on it its pulling 11 on the cyclic max

[waveydavey]

That's for the cyclic reference, in menu L set the cyclic limit as far as you can. In fairn ess 11 degrees is more than enough though.

[jasoncook]

just uped it to 14 and will give it a go on sunday.I found a post on the beast forum that stated as much as poss without binding.

[waveydavey]

How did it go Jason

[jasoncook]

Hi the increased cyclic limit did not affect the flying at all ! So it does not use all the available cyclic pitch well no more than 11 degrees. I then uped the ATV,s even more on the cyclic and ail to get the roll and flip rates I wanted. Cheers Jason