BeastX Setups

[agh321]

beastx with ar7100r

Hi just trying to set up my second beastx on a trex 700n

ime wanting to use an ar7100r rec and a jr 8900g tail servo so the problem is my tail servo coming out of the beast x can i simply put a 5.1 regulator from the beastx to my tail servo or am i missing something


i know ar7100r has a 5.2v built in but its supplied from the beastx at 6v an to me the 5.2v is bypassed


help needed Cheers

[Made2Fade]

Stick a 5.1 drop down in between the tail servo and Beast X Thats what i have done on mine using align 2in1 running 6v with the stepdown on the 8900g

[adieuk]

just done my v3 update and see how the setup goes tomorrow lol

[adieuk]

hi guys im struggling to get zero pitch on the blades in using the beastx bevel box, where do you put yours on the blades or on the main blade grips

[milly0812]

Best to set zero degrees mechanically. With collective at midstick take the blade grip bolt out and drop a hex driver with snug fit thru the bolt hole then when the driver is parallel to the main shaft it will be near as dammit zero degrees ;-)
I sit the gauge on the flat part of the grip to set pitch or if you have a smartphone there is an app called digipitch for about 60p which works well

[adieuk]

all sorted thanks Don

[oneandonlyian]

HMM im gonna need to do all this setup lark again come tues wednesday, beast x attempt no2

[wadders]

HMM im gonna need to do all this setup lark again come tues wednesday, beast x attempt no2

I'm thinking of going back to v2! I had my Heli spaz out for no obvious reason


---
I am here: http://maps.google.com/maps?ll=51.308941,-0.565787

[oneandonlyian]

I had beast x when it was first released but i felt i wasnt ready for it as my collective management was poor.. I have recently given fbl a go again and have been happy with the 3gx after hearing all the hoo haa about beast v3 i am going to give it a go.

Im still getting v bar but if im liking beast x that will go on the 600 and v bar on the 700.

[adieuk]

i didnt like v2 maybe it was just me hope v3 is better

[oneandonlyian]

I have read so many complaints about v2 and hear that v3 is about as good as it gets

[wadders]

Quick question, how's everyone's beastx powered???? Straight from the rx?????


---
I am here: http://maps.google.com/maps?ll=51.308712,-0.565710

[danch]

Mines straight from the Rx

[waveydavey]

So is mine

[adieuk]

mine is powered from the rx to