BeastX Q's

[Jamin_00]

How do I find out what version my BeastX is?

I thought it was a V2 but now Im thinking its a V1.

Is there a way to check?

[heliward0]

V1 has a different set up system so down load both v1 and v2 quick lists and follow you will soon see what version you have.

[heliward0]

One being servo centring from memory..
Or get the dongle and it will tell ya.

[bikerflier]

At power up all lights come on, then cycle and after 3 seconds light B will be on if it's v2.
If the lights just keep cycling then it's an older version.

[Jamin_00]

Right, on power up B lights up then it cycles so it a V2?

But then at menu set up point D I do not have a solid blue light as an option? the rest is all as a V2

[choppaholic]

at point D there isnt a blue light on anyones but the manual says there is, although you can never get to it, you wan the blue flashing at D anyways.

[ROCKET RONNIE]

Ben, SAV'S the beastx man lol he no,s them well

[Jamin_00]

Cheers, thats what I went for.

So how come there is not a blue light there then on anyones

[jwatts007]

Cheers, thats what I went for.

So how come there is not a blue light there then on anyones

Confused same here.............

[choppaholic]

for most of us it doesn't exist, although it does exist. in step C you should have chosen a blue light which is 1520 micro second pulse, on this speed servos centring pluse the flashing blue light 560hz will fry the servo before you finish setup or if you survive then with in a couple of flights. hence beastx guys have been clever and disabled it according with selection in step C.

on the other hand if you use Futaba BLS251 or MKS 980 which can run at 760 you will set red at step C and then you will get the blue light. considering most beastly guys dont run these servos i say they have never seen it