Beast just stopped working ??

[Martind]

Just came back from a flight with the fbl gasser & changed it to transmitter mode so i can tweek it. All reset ok then i turned it off and now when i turn it on i get no lights and no servo movment, just throttle???
Its running through a just heli reg at 6v with a 5000mha lipo

[chris jones2.4]

try resetting, i think i may have had this once :/

[Martind]

I have no lights dude ?? its got 5.2v going into it and out to the reciver. Not a thing is moving on it ??

[millerman]

are you sure the reg is working ok do you have power to the reciever ? or do you have another way to test your getting power from the reg ??

[Martind]

Tested it with a ni-cd 4.8v direct and nothing.
out of the reg is 5.2v
Into beast channels is 5.2v
out of beast va ele & ali & sys ports is 5.2v
Reciever is showing 5.2v

Just been on the phone to David at rc shop ie and he says its knakered and to send it back to Freak were. FOC

[waveydavey]

Make sure one of the servo leads hasn't lost a signal pin. The Beast leads are thick and I had 2 that weren't pushed home properley. I think if the Beast doesn't see any of the cyclic servos it won't initialise

[Martind]

Make sure one of the servo leads hasn't lost a signal pin. The Beast leads are thick and I had 2 that weren't pushed home properley. I think if the Beast doesn't see any of the cyclic servos it won't initialise

They have been hot glued from the first outing because there soo loose.
Just taken it out and it smells like a align esc

[millerman]

They have been hot glued from the first outing because there soo loose.
Just taken it out and it smells like a align esc

OOOPPPS not so good then better send it back

[Martind]

Oh well he said there not that fast on repairing but hay it will have V3 in it
Always got the velo to thrash about

[chris jones2.4]

looks like your gonna be killing the beam on sunday then

[Martind]

Might have to put it back to fb for a while as David said they are a bit slow Might be getting a strker f-27q tomorow
Is the weather ok for sunday??

[chris jones2.4]

better than saturday haha, just fitted a few upgrades to the 600 esp

[Martind]

Beast has now been sent on it's way to Germany. Let's see how long it takes to come back?


Sent from my iPhonings

[millerman]

Do you mind me ask how you sent it and cost ??


Sent from my iPhone using crapatalk

[Martind]

Do you mind me ask how you sent it and cost ??


Well £1.50 for 1st class but I wanted to make sure it got there so it ended up a £9 !! International signed for for the value of it.

Sent from my iPhone using crapatalk

Sent from my iPhonings