Announcement

Collapse
No announcement yet.

use with separate tail gyro?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    use with separate tail gyro?

    Can I bypass the tial on the beastX and use it with my CSM720 gyro?
    I only want a flybarless device, I am happy with my current tail setup - and from what I heard the beastX would be worse.
    www.heli-extreme.co.uk a good club in south Sheffield
    600n pro BeastX Align DFC head bls251, 3xbls451, align gov, 600d, 2in1
    trex500, BeastX DS510 swash, Beast X cutr and carve head DS520 HK3026-1900, Align 425D blades, 5S4200 rev'trix, K&BDD dampers, AR6200
    "450" superframeSTK, align DFC head v2tail, hk22281-8 on 3S 9650w9257gear commander 55A align 325D hitec digitals Tarot ZYX, AR6100e
    MCPX kbdd tail and blades, miniaviation bats

    Dont spend more flying models than it costs to fly for real
    Tags: None
  • #2
    Yes you can. However, give the tail on the Beast a go Gordon, it's not that bad. Needs a bit of work in tuning to get the best from it but I think you might like it if your used to the 720. I find the stick position for speed and the acceleration just right and comparable to my 720. If you still decide to use the 720 just make sure when you first do the setup on the Beast you have the rudder plugged into the Beast. Once through setup unplug and set up the 720. Otherwise, the Beast won't enter setup.
    Humble owner of 7 Eddie Gold Stars and Ex - member of Mk Heli Club
    sigpic

    Comment

    • #3
      I was wondering what the beastX would do if it just couldn't control the tail because the 720 had it!
      www.heli-extreme.co.uk a good club in south Sheffield
      600n pro BeastX Align DFC head bls251, 3xbls451, align gov, 600d, 2in1
      trex500, BeastX DS510 swash, Beast X cutr and carve head DS520 HK3026-1900, Align 425D blades, 5S4200 rev'trix, K&BDD dampers, AR6200
      "450" superframeSTK, align DFC head v2tail, hk22281-8 on 3S 9650w9257gear commander 55A align 325D hitec digitals Tarot ZYX, AR6100e
      MCPX kbdd tail and blades, miniaviation bats

      Dont spend more flying models than it costs to fly for real

      Comment

      • #4
        I don't know whether it's just me but I didn't think it felt as good as with the Beast tail. It works and it proved I had a problem with the Beast (reverted back to V1) just not so locked in. Give the Beast a go Gordon
        Humble owner of 7 Eddie Gold Stars and Ex - member of Mk Heli Club
        sigpic

        Comment

        Previous template Next
        Working...
        X