setup advice

[matt t]

hey guys

first ever time i have ever touched a beast x
its going on my velocity 90 and was wandering if you guys could give me some heads up and tips on how to use this system

Also does it need any extra padding or will the pads that come with it be suffice ?? ....
any advice will be appreciated

[tomcat]

Should have got a v-bar!

[matt t]

was in the picture mark if you wanted to lend me £100 for the extra reciever

[millerman]

The beast x can only be mounted on top of the elevator servo plate unless
You are happy to start hacking up the radio tray lol. pads is a trial
And error game with the beast x the White cut out tape is I found at best useless the STD tape works ok best tape is 2/3 layers of maplins tape


Sent from my iPhone using crapatalk

[challis349]

Have a look on bens (jamin_00), I think I saw a link on there somewhere to do with set up

[matt t]

cheers ... would you say they are quite simple to set up ??

bit off topic but how much roughly was it to kit out your fusion ?? sorry about the question

[matt t]

okk thanks kev

[tomcat]

Matt I will help you as much as I can but not financially sorry! Ps will give you a game of pool later in the week.

[matt t]

wicked

[millerman]

cheers ... would you say they are quite simple to set up ??

bit off topic but how much roughly was it to kit out your fusion ?? sorry about the question

My fusion spec is as follows
Scorpion 4025 550
Scorpion 50v 90a commander esc
Outrage 9080 cyclics
Outrage 9088 tail
Skookum sk720 + 2x dsmx remotes
Outrage 2500 2s lipo for receiver
Turnigy 3300 nano's 12s
Spin blades 600 fbl
Price is quite a lot

And set up of the beast is pretty straight forward just read the instructions


Sent from my iPhone using crapatalk

[adieuk]

My fusion spec is as follows
Scorpion 4025 550
Scorpion 50v 90a commander esc
Outrage 9080 cyclics
Outrage 9088 tail
Skookum sk720 + 2x dsmx remotes
Outrage 2500 2s lipo for receiver
Turnigy 3300 nano's 12s
Spin blades 600 fbl
Price is quite a lot

And set up of the beast is pretty straight forward just read the instructions


Sent from my iPhone using crapatalk

nice setup kel

[matt t]

cheers they surely looks the dogs bits

[millerman]

nice setup kel

Ta aide


Sent from my iPhone using crapatalk

[derrick]

Hack the tray makes for a nice neat instalation, standard pad with the centre taken out has worked fine for me.

[matt t]

ok thanks derrick ... ive seen people put it in the dip behind the reciever tray is this ok ??