Maiden Beast X

[GIXERMAN]

Had my first flight with beastx today on my 600esp very impressed, only used align before.

straight into the hover, tested controls and pyro on tail, and flew with confidence, the tail was solid well chuffed, hows everyone liking it.

regards

[stunks]

I have 3 units 0n my 700,600 and 550 and i love it feels great doest what its ment to do feel rock solid ect ect

[LipolyGone]

Mixed feelings for me, i have an interaction on my 450 pro.
When I go full positive or negative collective it pitches the nose down.
Not sure why or how need to look into it possibly redo the whole setup.

[Eckchaz]

I love it on the 600.. its does what it says on the box for me and I did have little setup issues with the unit but resetting it sorted my probs out.. I loved it soo much.. I got one for the Velocity 90 and now I'm just waiting for another unit to get delivered tomorrow to do the 500!

[Planehazza]

Martin, change the trim parameter. I had a roll on punchouts, added a bit of trim on parameter A I think it was and it's now close the perfect.

[Sticky Stick]

Rcslopesurfer

Check your mechanical set up.

Do you have a swash alignment tool to ensure your swash is set level at 0 degrees? Are all your servos arms perfectly level at 0 aswell? If not use the subtrim feature and adjust your links to get all this spot on.

Also try adjusting your gain (pot 1) up.

[ROCKET RONNIE]

got it on my trex 500 and 550 and love it

[TomW]

I want one!!!

[tourerjim]

Mixed feelings for me, i have an interaction on my 450 pro.
When I go full positive or negative collective it pitches the nose down.
Not sure why or how need to look into it possibly redo the whole setup.

Check the swash plate with leveling tool also be sure your servo horns are 90 degrees @ zero pitch
Beastx can't compensate for any swash interaction so its very important to be sure there's no interaction between full neg & full collective.
If you suspect this is the case you need to do a beastx reset.

[Lynx.1677]

I had issues on my 450 Pro. For the most part it flew ok until pushed then it would have a bobble which no amount of tweaking would eliminate. Seems to be a common theme for issues on the smaller birds but on the bigger heli's it seems to be fine.