Announcement

Collapse
No announcement yet.

can i downgrade?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • can i downgrade?

    after a failed attempt at getting my vision (piece of crap) working fbl, ive decided its not going to work, my beastX is running version 2 and i would like to get it to version 1 because i would like the gyro function

    cheers chris
    Chris 'CHUNK' Newby
    Trex 700E DFC_Align BL800MX_CC160HV_BL700H_BL750H_Spartan VX1n_Haiyin 5000mAh 12s
    Trex 700E DFC_Align BL800MX_CC160HV_BL700H_BL750H_Spartan VX1n_Haiyin 5000mAh 12s
    NAHC-Newton Abbot Heli Club, check out the website at WWW.NAheliclub.org.uk

    ALIGN-TREX.CO.UK team pilot
    LYNX team pilot
    SPARTAN team pilot
    Dx18

  • #2
    If you have the USB interface for the beastx you can download the version 1 software from here

    -= BEASTX - BE ABSOLUTE STABLE =-

    I don't know if it is reversable to version 1, but as far as I know this is the only way to change the software
    Trex 450 / Atom 500 / Fusion 50 all with BeastX

    Comment


    • #3
      But not that long ago, you were saying how awesome it was??? :/

      Comment


      • #4
        What's not working chap ??
        Cheers,
        Simon
        --------------------------------------------
        Trex 700N & E
        Futaba 18mz and some planks !!

        x 2

        Comment


        • #5
          Chris, just had a look at your picture of your Comp from another post. I'm not sure how much difference it makes, but I thought the original swash was bloody awful with the flybar, and not much better with the fbl. I was always suffering with unwanted interactions. The FIA swash (which has the upper balls running inline with the lower balls) was a massive improvement.

          Also, you are running your head with trail edges control, again I found my Comp flew much better when I flipped the grips to leading edge control (you will need to check your set up again if you try this !!!)
          Cheers,
          Simon
          --------------------------------------------
          Trex 700N & E
          Futaba 18mz and some planks !!

          x 2

          Comment


          • #6
            Yeah the stock swash on the Vision is riddled with interactions. I have the Ultimate and the swash is very similar if not exactly the same. Mind you, it flies pretty good in stock form but constant small corrections are needed.

            I just put a Cyclock on mine and have tuned out all the interactions. I am very curious to fly it now but was too busy with work last week, hopefully tomorrow or Tuesday I'll test it.

            I think FBL systems have the ability to compensate for a lot of interactions because they are always correcting to hold the last position. So it seems in some cases the Beast X (or FBL unit of choice) ends up curing the issues.
            Kasama, Minicopter, Henseleit, JR, Shape, Beam
            Robbe, RMJ Raptor gasser, powered by
            Spartan, Spirit, BeastX, Kontronik, CY Total-G, DX8

            member of Epsom Downs and Bloobird clubs
            Proud recipient of 7 EGS! and a platinum star

            Comment


            • #7
              im gonna rebuild the whole thing and see how a vario swashplate works on it!

              thanks si, im gonna flip the grips aswell, it just hasnt been behavin itself the past 2 weeks!!
              Chris 'CHUNK' Newby
              Trex 700E DFC_Align BL800MX_CC160HV_BL700H_BL750H_Spartan VX1n_Haiyin 5000mAh 12s
              Trex 700E DFC_Align BL800MX_CC160HV_BL700H_BL750H_Spartan VX1n_Haiyin 5000mAh 12s
              NAHC-Newton Abbot Heli Club, check out the website at WWW.NAheliclub.org.uk

              ALIGN-TREX.CO.UK team pilot
              LYNX team pilot
              SPARTAN team pilot
              Dx18

              Comment

              Working...
              X