Tweet
Anyone using this combination without any issues and if so how long have you been using it like this.
-
Last edited by waveydavey; 05-03-2011, 08:35 PM. -
I have on my 700 and 600 and no problems only one thing tho the beast is power hungry lol but i love it either wayDo what u do best
T rex 700LE beast x radix 710 fbl blades
T rex 700LE stock radix 710 SB
T rex 600LE beast x radix 600 fbl blades
T rex 550E beast x align blades
DX7 and DX8
Phoenix sim
And plenty of spare parts
-
Me, prob about 30 or more flights on 600 size. Using 610 servo
Sent from my iPhoneGaui x7 lush
Gobbalin 500
Trex700 new dfc n OS 105/vbar love it
ALL ON SPEKKY GEAR
Blade 130x2
nanoComment
-
I was running my 700 on it and it was fine!Comment
-
BeastX, 2in1 and 610s on my Vision50. Working fine.Harry
Mikado Logo 700 | VBar Neo | JR HV Servos | Pyro 750-50L | Kontronik Kosmik 160HV + buffer pack|
Thunder Tiger G4 E720 | CGY760 FBL | BLS272SV + BLS276SV | Align 800MX Dom 440kv | Kontronik PowerJive 120HV + Opti UltraGuard |
SAB Kraken 580 6S | Spirit FBL | BLS173SV + BLS276SV | HK4025 1100kV | Kontronik Kolibri 140LV + Opti UltraGuard |
And a pillow for the doghouse...
Powered by Futaba 18SZComment
-
been running 2in1 on my 600 for about 40-50 flights now no issues at all. the first 30 odd flight were on Futaba S9252, S3152 and S9254 it was fine. I am now running Align 620's all round including throttle and align DS650 on Tail and all is good for the last 10 odd flights.Trex 700N LE FBL
Trex 600N DFC, OS 55HZ, Vbar
Trex 600e FBL, 12s Scorpion 630kv, Vbar
Trex 500e FBL, Scorpion 1400kv, Spirit
sigpicComment
-
I ran my beastx 600 with 610's and a 9256 tail with the 2:1 and it was fine ..except that I was only getting a couple of flights before being down to the last green ..even with a 3000mah pack... decided that particular 2:1 wasn't reading packs right (compared to the recharge) so swapped it out for safety with an elyq. But to be fair never had a flight problem with the 2:1 whe it was on board...for 30-40+ flightsPGK
450Pro Clone fb, Trex500 fbl beastx, Trex 600N fbl beastx, Trex700N fbl msh brain, Spectra G Hanson 26 3dmax fb, Blitz Avro fb...Futaba 8FGComment
-
Cheers guys. I've been using the Beast for a while now but with a Spectrum Regulator. I've just got an N5 and will probably put the Spectrum on it and fit the 2 in 1 to the 600. Or thinking about it maybe the other way round.Comment
-
Yes- on both 90s- the DS610s on the 700 are power hungry and I have no evidence, but I think there has been the odd blip, though nothing dramatic, jsut a bit of a strange wobble.Synergy N5C with 3GX on the bench
Trex 500 ESP FBL BeastX -soooooooooo fast
Trex 700 LE Beast X'd and no sticky out bits
Velocity 90 BeastX FBL-the love affair has begun!
Newton Abbot Heli CLub where the sun always shinesComment
-
I'm using that on the 600.. no problems.. the only niggle is that the lights like to go to orange despite a fully charged lipo
Eddie
Velocity 90 FBL BeastX V3
Trex 600 LE FBL BeastX V3
Trex 500 EFL Pro BeastX V3
Fusion 50 FBL VBar
All powered by a DX8Comment
-
Looks like im the only one who had problems. Burnt out 2 while setting beast x up. Used a perfect regulator instead and that was fine (until last week with no beast) until regulated tail output decided to let go.
I have a brand new 2in1 and will be happy with this one. My problems where probably one off's and have not put me off using them, beast x is a hungry bugger though.Comment
Comment