Beastx Swash Servo Direction.

[Aidi]

Finally managed to get a BeastX... Missed my first opportunity to get one, but came good in the end.

Got a bit of a problem here on menu I - Swashplate servo direction..

Hardware is:

• DX7
• AR7000
• JR 8915

No matter what configurations i set, i cant get the swash to move up/down without interaction from ail/elv. Checked all the connections from Beast to Rx and all seems good. Servos Norm/Rev tried in all different postions and Swash is set to 120degs -+- all on 60 which is default..

Kinda baffled here!

Anyone care to offer advice pls!!

[millerman]

Is the swash set to 120 on your radio if it is set it to 90 1 servo and restart your setup again then it will be ok
The beast has it's own swash driver setup


Sent from my iPhone using crapatalk

[Bart101]

Have you set it to 1 servo 90deg on your TX?

[Aidi]

Be right back!

[Cuppa]

Have you set it to 1 servo 90deg on your TX?

In swash mix 'H' you are only after correct movement for +&-
pitch (swash up&down) alie is done through tx rev function v2.
the v1 envolves more stick twidling but is a walk in the park
once you've sus'd it

[Bart101]

I know, but you still need to disable the swash mix in the TX, because the BeastX does all the mixing! As you already know!

[Aidi]

Sorted. Thanks for the fast replys chaps. Had it set to 90 3 servos. All going up/down nicely.

Cheers
Aidi