Announcement

Collapse
No announcement yet.

BeastX vs Cr@p pilot

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • BeastX vs Cr@p pilot

    A bit of background - I've been flying (crashing) my Trex 500 since May 2009. I don't get out to fly much. I can do lazy 8s, cr@ppy circuits, nose in, and the odd flip. I suffer from chronic dumb-thumbitis. I am an ex-engineer, and up until fitting an Align 3G system, had never had a mechanical/electrical failure in flight - basically, I crashed too often & rebuilt before any problems could occur. I fitted a 3G, and it failed, wrecking my heli.

    Now - beastX - very easy install, very tidy. The setup went perfectly, I found the instructions very clear & easy to follow. I opted for all the defaults.

    Last proper flying was in May.

    Today, I got to try out my heli with the beast. It was fantastic! Spooled up, put it in the air, and it just sat there!

    Even with a gusty breeze, I could take my thumbs off for several seconds at a time. Bear in mind, this is with out-of the-box settings!

    On my first flying since May, rusty as hell, I managed lazy 8s, a couple of circuits, and several nose-in hovers. This thing just inspires confidence.

    Another thing:- I was getting 5 minutes a pack with a flybar. I flew 6.5 minutes per pack today, and had 28-30% left!

    There's been a lot of discussion about the beastX on here, but mainly from experienced pilots. I thought input from a cr@p pilot might be of interest.
    Brian


    More enthusiasm than skill

    And proud recipient of 3x sigpic

  • #2
    Great to hear your back flying Brian, and enjoying the Beast!
    Henseleit TDR V-Bar x2
    SAB Goblin 700 V-Bar
    SAB Black Nitro V-Bar YS91 Tareq SRX
    T-Rex 700e DFC V-Bar
    T-Rex 700N MAJ DFC V-Bar YS91 Tareq SRX
    Synergy N7 V-Bar OS105 HZ-R
    Synergy E7se V-Bar
    Synergy N5c FBL V-Bar
    Gaui NX7 V-Bar YS91 Tareq SRX
    T-Rex 550 E FBL V-Bar
    Gaui NX4 V-Bar
    V-Control

    Proud owner of TWO!! Platinum Stars!

    Comment


    • #3
      Originally posted by Rctintin View Post
      Great to hear your back flying Brian, and enjoying the Beast!
      Thanks, Rob. Coming to the end of our season, so, weather permitting, I should be flying more soon. The beast is awsome!
      Brian


      More enthusiasm than skill

      And proud recipient of 3x sigpic

      Comment


      • #4
        Yeah, good on you Brian. Glad to hear your back in the air, and most of all..... Your enjoying it
        Graham



        University of life. Studying cool .
        HK 500GT, 450 (Scorpioned) Pro clone, TT Innovator MD530, Trex 450SE (Slowly being recommissioned) mCPx,
        mSR MD500E, CX2, mCX, PKZ Micro Mustang (All gathering dust)
        Phoenix, DX6i.



        x2







        Comment


        • #5
          Yeah, so many great reports on it, and seeing the new FBL head for the N5, this may be making an appearance in the Gloucester area before long!!
          Henseleit TDR V-Bar x2
          SAB Goblin 700 V-Bar
          SAB Black Nitro V-Bar YS91 Tareq SRX
          T-Rex 700e DFC V-Bar
          T-Rex 700N MAJ DFC V-Bar YS91 Tareq SRX
          Synergy N7 V-Bar OS105 HZ-R
          Synergy E7se V-Bar
          Synergy N5c FBL V-Bar
          Gaui NX7 V-Bar YS91 Tareq SRX
          T-Rex 550 E FBL V-Bar
          Gaui NX4 V-Bar
          V-Control

          Proud owner of TWO!! Platinum Stars!

          Comment


          • #6
            thats really good new Brian, I guess with the added confidence your flying with progress far more quickly.

            im still tempted to convert one of mine but they fly too well at the mo so im not sure I will gain much from the additional cost. Maybe Santa will bring my one
            Goblin 700

            Comment


            • #7
              Well, there are some reports of people doing extreme 3D having problems, but I don't think that's an issue for me any time soon. It is an instant confidence boost, and I would recommend it for anyone who is a sport flyer. The only note of caution is that it needs a degree of understanding to set up, so may not be ideal for a complete noob - my problem has always been that I know what I should do, just my thumbs don't agree!
              Brian


              More enthusiasm than skill

              And proud recipient of 3x sigpic

              Comment


              • #8
                It just works so well. Was sold on the way the fbl models fly with my original 3g, but after a number of unexplained crashes and tip overs I went back to my flybars.

                Still need a few more sessions on my Vision Comp with the Beast X fitted, but even on the standard settings, my confidence is growing in the unit.
                Cheers,
                Simon
                --------------------------------------------
                Trex 700N & E
                Futaba 18mz and some planks !!

                x 2

                Comment


                • #9
                  Originally posted by Si_B View Post
                  It just works so well. Was sold on the way the fbl models fly with my original 3g, but after a number of unexplained crashes and tip overs I went back to my flybars.

                  Still need a few more sessions on my Vision Comp with the Beast X fitted, but even on the standard settings, my confidence is growing in the unit.
                  Couldn't agree more!
                  Brian


                  More enthusiasm than skill

                  And proud recipient of 3x sigpic

                  Comment


                  • #10
                    Love the thread title Brian

                    And im glad your enjoying the beast X
                    Avant mostro 700E
                    Avant mostro 700 Nitro



                    member of :
                    South cheshire heliaddicts

                    Comment


                    • #11
                      I guess I was lucky that the set up vids came out, which can be used along side the instruction manual. Had no problems setting mine up, but could see where the mistakes could creep in without the benefit of a video.

                      Can't wait for the weekend
                      Cheers,
                      Simon
                      --------------------------------------------
                      Trex 700N & E
                      Futaba 18mz and some planks !!

                      x 2

                      Comment


                      • #12
                        Brian,

                        Nice post mate, really glad to hear that you are back in the saddle and feeling gooooooood

                        Cheers,
                        Simon


                        BNUC-S certified
                        ---Guinness World Record Pilot 2011 & 2012---
                        sigpic

                        Comment


                        • #13
                          Sound like ya done well after considering not flown for some time, if your a relaxed kind of flyer then the beast is really good bit of kit for the 500 but dont think its the kit for 500 if your into hard 3d.
                          Today's outlook is fine for flying.
                          • Spektrum DX18 gen2, Phoenix Sims, Align MR25XP.
                          • Blade Nano, mCP X, 130x, Blade 180, Mini T 450se
                          • Trex 250dfc Gpro, Trex 500EFL Gpro.
                          • Trex 600E Gpro DFC, Trex 600NSP now Gpro, DFC, Redline 56
                          • Flickr Through My Pictures.
                          • A helicopter is an aircraft that is lifted and propelled by one or more horizontal rotors because Wikipedia said so.

                          Comment


                          • #14
                            Originally posted by tourerjim View Post
                            Sound like ya done well after considering not flown for some time, if your a relaxed kind of flyer then the beast is really good bit of kit for the 500 but dont think its the kit for 500 if your into hard 3d.
                            Thanks. Given my skill level, I don't think I'll have to worry about reaching the limits of the beast any time soon.

                            I agree there seem to be problems with extreme 3D - I believe beast are looking to release a firmware upgrade in the near future.
                            Brian


                            More enthusiasm than skill

                            And proud recipient of 3x sigpic

                            Comment


                            • #15
                              Originally posted by Si_B View Post
                              I guess I was lucky that the set up vids came out, which can be used along side the instruction manual. Had no problems setting mine up, but could see where the mistakes could creep in without the benefit of a video.

                              Can't wait for the weekend
                              I watched the vids, and for me, the most interesting info was about vibration issues - I went over my 500 with a tooth-comb, weighed & balance my tailblades, etc.

                              This might have helped towards me having a successful maiden of the beast.
                              Brian


                              More enthusiasm than skill

                              And proud recipient of 3x sigpic

                              Comment

                              Working...
                              X