Tweet
Ok, I know there are a few of you out there running the beastx on a trex 500. Where are you pitting the beastx? On top of the boom mount or on the gyro tray?
-
Gerd
2 x
for me -
My mates done a nice install on the boom mount, easy to run wires for radio then. and good place for the beastxGaui x7 lush
Gobbalin 500
Trex700 new dfc n OS 105/vbar love it
ALL ON SPEKKY GEAR
Blade 130x2
nano -
If you put it on the gyro tray you can't get at the buttons and lights..PGK
450Pro Clone fb, Trex500 fbl beastx, Trex 600N fbl beastx, Trex700N fbl msh brain, Spectra G Hanson 26 3dmax fb, Blitz Avro fb...Futaba 8FGComment
-
Originally posted by rapidgaz View Post
I'm just in the process of installing mine - I think it'll fit perfectly on the boom mount, make a very tidy install.
Brian
More enthusiasm than skill
And proud recipient of 3x sigpicComment
-
Hi..
Here's mine... All the wires run between the frames. One side for the servos, the other to the RX..
Flys great...Attached FilesComment
-
-
Thanks Guys, wasn't sure if there would be vibes coming through the boom mount from the TT but obviously not Gonna start getting mine installed as soon as I get the new boom and TT which I didn't notice were needed after last crash !
Gerd
2 x for meComment
-
Nice one on the Beast X Gerd. What FBL head did you get?
Have to pop over and see how she flies
SteveComment
-
Gyro tray- much neater imo and easy to get to the single button and also see the lights.
I bent the little driver 90 degrees to get to the pots-Synergy N5C with 3GX on the bench
Trex 500 ESP FBL BeastX -soooooooooo fast
Trex 700 LE Beast X'd and no sticky out bits
Velocity 90 BeastX FBL-the love affair has begun!
Newton Abbot Heli CLub where the sun always shinesComment
-
what is going on, wrong post, think my pc is on the blink againLast edited by rapidgaz; 09-09-2010, 12:52 AM.Gaui x7 lush
Gobbalin 500
Trex700 new dfc n OS 105/vbar love it
ALL ON SPEKKY GEAR
Blade 130x2
nanoComment
-
Steve, I went with this FBL head, which I believe is the RJX one. Got some spares to get today then on with the build. Hopefully have her in the air at the weekend and then you are welcome to come over the field
Gerd
2 x for meComment
-
Nice one Gerd, the RJX head looks nice.
Just might well be able to come over Sunday afternoon.... depends on if I recover from a BBQ on Sat night!!
I'll give you a tinkle.SteveComment
-
Fitted mine on the boom support but on test flights needed to set the parameters to 'extreme'Today's outlook is fine for flying.- Spektrum DX18 gen2, Phoenix Sims, Align MR25XP.
- Blade Nano, mCP X, 130x, Blade 180, Mini T 450se
- Trex 250dfc Gpro, Trex 500EFL Gpro.
- Trex 600E Gpro DFC, Trex 600NSP now Gpro, DFC, Redline 56
- Flickr Through My Pictures.
- A helicopter is an aircraft that is lifted and propelled by one or more horizontal rotors because Wikipedia said so.
Comment
Comment