Tweet
B– Control behaviour
At menu point B you can choose between different control behaviours for your stick inputs. This includes the maximum rotation rate of the helicopter as well as how sensitive MICROBEAST will react to stick inputs for aileron, elevator and yaw around the stick centre.
Factory set the option „sport" is selected! This should be suitable for most pilots.
If you are a rather unexperienced model pilot it is absolutely suggested to select the option „normal" for the first flights. In this state the rotation rate of the helicopter is decreased very much and the stick inputs are very gentle.
It is also possible to adjust the control behaviour by your transmitter‘s expo function. Therefore switch the status LED colour to „blue".
The maximum rotation rate for aileron, elevator and yaw can be adjusted by increasing or decreasing the servo travel for the corresponding function in your transmitter.
Can anyone guesstimate equivelent tx settings? I'm assuming here that the modes relate to amount of expo only with servo travel/speed having been set at a constant default??? OR do the modes mix expo with 'internal' servo end point changes?
In other words to save plodding through the experimentation is there a starting point on the tx expo/endpoints that equates to each of the modes provided?
If I gave myself 15% expo and 110% travel ail/elev is that similar to the expert mode or entirely different and going to be a shock to the thumb response?
Comment