If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
AR7200BX in Trex 450L act like my Blade 230s in Stability mode?
Something is definitely happening When i have it a 0%.
The tail servo chatters.
Thanks so much for this!
Attached Files
Trex 450L Dominator (flown six times crashed twice)
Blade 230s (my hard working trainer)
Blade CPS (for smashing into walls)
Blade SR HUEY (too scared to fly at the moment, the 230s is going to end up in here)
Phoenix Sim
DX6i
0% is no use, that basically turns the gyro off. Put it to 50% then reverse the channel to make it go negative.
it says headlock + stabi
is that good?
Trex 450L Dominator (flown six times crashed twice)
Blade 230s (my hard working trainer)
Blade CPS (for smashing into walls)
Blade SR HUEY (too scared to fly at the moment, the 230s is going to end up in here)
Phoenix Sim
DX6i
Trex 450L Dominator (flown six times crashed twice)
Blade 230s (my hard working trainer)
Blade CPS (for smashing into walls)
Blade SR HUEY (too scared to fly at the moment, the 230s is going to end up in here)
Phoenix Sim
DX6i
I don't need to do anything in channel mapping do i?
it seems to be happy
Attached Files
Trex 450L Dominator (flown six times crashed twice)
Blade 230s (my hard working trainer)
Blade CPS (for smashing into walls)
Blade SR HUEY (too scared to fly at the moment, the 230s is going to end up in here)
Phoenix Sim
DX6i
No, all 6 of your channels are mapped so all is good. Once you get some test flights done and figure out the optimum tail gain then we can go through how to fix the gain and use channel 5 for switching between stabi modes by bank switching... that will give you rescue.
Trex 450L Dominator (flown six times crashed twice)
Blade 230s (my hard working trainer)
Blade CPS (for smashing into walls)
Blade SR HUEY (too scared to fly at the moment, the 230s is going to end up in here)
Phoenix Sim
DX6i
Just remember to double check that gyro compensation is going in the correct direction before you fly. Especially the tail, seen so many people get that one wrong, even the pro pilots.
Trex 450L Dominator (flown six times crashed twice)
Blade 230s (my hard working trainer)
Blade CPS (for smashing into walls)
Blade SR HUEY (too scared to fly at the moment, the 230s is going to end up in here)
Phoenix Sim
DX6i
Comment