Tweet
Hi I'm trying to set up a beastx on a Terex 450 pro converted to cfc can't get 6 degrees blue status light on beast x, could one of you kind fellas out there tell me what hole you are sticking your balls in on the horn and what is the length of your link rods from servo horn to swash. I'm following the manual and it tells me to stick the ball in second hole from the end on the servo horn and the spacing of the link rod is 10.5mm.
-
-
Third out from centre i think -
Just thought what swash are you usingComment
-
I wouldn't worry too much if you can't get it, get as good as you can and go from there. It's more important that the 6 degrees are accurate, the led just gives an indication to ideal geometry for the BeastX control algorithmsComment
-
Cheers read that the 6 degrees was important and the light was just for referenceComment
-
My one is on the second hole in. And I have a blue lightComment
Comment