ar7200bx parameter menu E

[crash-test-tomo]

Morning all, I currently have menu E - set at red flashing, as per the manual. Is this setting basically the same as running expo through the tx?
Generally I have always used a small amount of expo on aileron and none on elevator. . Should I be setting parameter E to off if I want to set my tx this way?
Thanks guys

[GIXERMAN]

Have control to tx then you can adjust flip and rolls rates and tail, and expo rather than then bx

i always left as factory on red flashing

[waveydavey]

In the paramater menu B then set led to blue I think to give you Tx control, menu E is stick deadband nothing to do with expo. When you set to Tx control as Brian says above you can set the ATV's to give you the flip and roll rate you want also set dual rates and expo as you need. Make sure you don't use expo on the BeastX presets like Sport, Pro, Extreme ETC as these already have expo and set rates for roll and flip

[crash-test-tomo]

Cheers guys. I have parameter B set to tx already I just didnt want to use any expo before I knew it wouldnt conflict with the deadband! Thanks