AR7200BX pot setting for an Align 450 pro

[James75]

Hello,

I have recently converted my 450 pro to DFC, I had a few set backs but I finally got it in the air with the AR7200BX installed. Got my tail pretty locked in, but have some oscillating on the elevator axis. I played around with pot 1 as manual says that i need to reduce this bit not found the sweet spot yet. Does anyone else fly a 450 Pro with the BX and if so what pot settings does anyone use ? And any other advice is also welcome on this set up.

Cheers James.

[MarkG_R1]

My 450 is an SE v2 but the sweet spot on mine is at 11o'clock on the dial

[James75]

My 450 is an SE v2 but the sweet spot on mine is at 11o'clock on the dial

cheers, when you say 11o'clock, do you mean 30 degrees left of the central default position ? Also what do you have the other 2 pots at ? I know each heli will be slightly different, but just interested to know ? I have increased pot 3 to about half way between the central position and the max so 3 o'clock ish. Thanks again !

[MarkG_R1]

Sorry I got that wrong, been messing with it since trying 11 o'clock and it now looks like this