kontronik jive 80hv bec for bavarian demon or helicommand 3sx

[gary911]

Hi, I am planing to use a bavarian demon flybarless unit on a scale vario helicopter, the bavarian demon requires 5.5 volts constant power supply, is the kontronik bec suitable for this,

I am using JR servos 4.8 volts 3 on cyclic jr DS 8915 and 12s setup I will be using 2x spektrum satellites and have read that people have had the satellites go into reset mode if they put quick demand on the servos Can someone tell me if I need to use a seperate higher voltage bec please.

Thank you.

[Jamin_00]

I use the BD units on Jives without issue on stock settings.

Running a buffer would help ease your concerns or simply up it from 5.6v to 6.0v and don't worry at all.

[BenScoobert]

Hi, I am planing to use a bavarian demon flybarless unit on a scale vario helicopter, the bavarian demon requires 5.5 amps constant power supply, is the kontronik bec suitable for this,

I am using JR servos 4.8 volts 3 on cyclic jr DS 8915 and 12s setup I will be using 2x spektrum satellites and have read that people have had the satellites go into reset mode if they put quick demand on the servos Can someone tell me if I need to use a seperate higher voltage bec please.

Thank you.

Likewise here, never had one reset. Kontronik BEC and an optiguard, bombproof.