tail drift in helicommand 3a

[kev2009]

hi guys any one come acroos this, tail drift to the right in 3a, ok in rate put in hh goes to right even if i push tail to left it comes back, and it does that with out starting, every thing else looks ok, heads tilts in right directions,

any help would be appreciated kev

[BenScoobert]

I've found they can do this on the bench but doesn't seem to do it in flight.
Is yours just on the bench?

[kev2009]

I've found they can do this on the bench but doesn't seem to do it in flight.
Is yours just on the bench?

yes on bench, but not tried flight yet as bit woried about this, anouther thing is when im setting % in radio it shows different numbers in sofware, like 70% on radio is about 48 in sofeware, is this normal,

thanks for reply kev

[BenScoobert]

yes on bench, but not tried flight yet as bit woried about this, anouther thing is when im setting % in radio it shows different numbers in sofware, like 70% on radio is about 48 in sofeware, is this normal,

thanks for reply kev

Make sure you have all the pitch curves linear, also check your endpoints in the tx