Tweet
I have a CC Bec Pro installed so I don't have any spare power ports, can I apply power into unit where I have remove the esc wire, or do I join into another wire?
-
Current Fleet,
T-Rex 500 Pro: Demon 3SX, Revolution/Rail, Blades, DS510M, DSDS655, CC BEC Pro,
Goblin 500: Vortex VX1n, DS510M, DS655, Talon, Scorpion backup guard, Revolution 520 Blades.
Phoniex Sim, DX9, PL8 charger, Fusion 600watt PSU
sigpic -
Could a heavy duty Y lead work?
Sent from my GT-I9100 using TapatalkGoblin 500 SportMatt
Owner of One E.G.S. -
And plug it into ESC port, as I have removed the esc power wire, or split one of the CC bec pro wires using the y leadCurrent Fleet,
T-Rex 500 Pro: Demon 3SX, Revolution/Rail, Blades, DS510M, DSDS655, CC BEC Pro,
Goblin 500: Vortex VX1n, DS510M, DS655, Talon, Scorpion backup guard, Revolution 520 Blades.
Phoniex Sim, DX9, PL8 charger, Fusion 600watt PSU
sigpicComment
-
You could do either of those.. as long as the optiguard is connected to the power bus it will work.
So a Y lead on the esc lead or on the castle pro bec will work. Whatever works for you really.
Sent from my GT-I9100 using TapatalkGoblin 500 SportMatt
Owner of One E.G.S.Comment
Comment