Helicommand Servo SUB Trim

[pakirk]

Hi, this is my first post and I am a newby with helis
I am banging my head off the wall now trying to setup the HC Ridges V2 on my TT500.
I can NOT find in the PC software where you use SUB Trim to set the servos to 90dec.
I have read many posts and instructions and wached several videos which ALL say use the RC&Trim tab in the software to trim up each servo to 90.
I CANT FIND WHERE TO DO THIS.......

"Now the servos are mechanically centered as close as you can get them so we now use the +/- buttons in the software to precisely center the horns. "

There are Internal Autotrim settings on this page but if I change any of them it alters ALL the servos in various ways...

PLEASE could somebody help me as I am about to give up...

I am using version 2.3.2 and I have also tried V2.0 also.

Thanks
Anthony

[panosg]

Here should be your best bet to find all the info you need.

[pakirk]

Thank you I will have a look.