Announcement

Collapse
No announcement yet.

Align 3G on Vibe 50????

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Align 3G on Vibe 50????

    Evening all, just wanted to ask if anyone is or has tried the Align 3G on a Vibe 50 FBL.

    Any help, suggestions or comments would be most welcome.

    Cheers in advance

    Gavin
    Gavin
    • Thunder Tiger Raptor G4 FBL - OS105 HZ-R, Bavarian Demon 3SX, MKS HBL HV Servos, Reactor HVX, Optifuel SLV 25%
    • Thunder Tiger Raptor E720 FBL. Bavarian Demon 3X, (Under Construction)
    • Gaui X7 - (Under Construction)
    • Synergy N5CTT - OS55 HZ-R, Bavarian Demon 3X, (Under Construction)
    • Gaui X5 Formula - XNova 4025-1100, Castle Talon 120HV ESC, Bavarian Demon 3X, MKS BLS Servos, Spin Black Belts, Optipower 6S 4300's
    • KDS Agile 5.5 - XNova 4025-1100 Motor, Castle Talon 120HV ESC, Rail 556's, Optipower 6S 5000 Ultras
    • JR Vibe 50 FBL Nitro (Retired!)


    Optifuel * Bavarian Demon * MKS Servo Tech * Optipower

    sigpic


    http://www.kaos-rc.co.uk

  • #2
    Hi Gavin I have a Vibe 50 FBL , JR head, but a Total G fbl controller and she is fab a real pleasure to fly

    I personally wouldn't use the align controller but that's just my oppinion.

    Beast X ??? yes that will work.

    V bar & total G fab but expensive.

    Hope this helps any questions put them up or PM me.

    's Rachel

    Comment


    • #3
      Rachel,

      Thanks for the tips, Beast X may well be on the cards. Have thr 3G unit just sat there though, so will have to wait and see.

      Cheers

      Gavin
      Gavin
      • Thunder Tiger Raptor G4 FBL - OS105 HZ-R, Bavarian Demon 3SX, MKS HBL HV Servos, Reactor HVX, Optifuel SLV 25%
      • Thunder Tiger Raptor E720 FBL. Bavarian Demon 3X, (Under Construction)
      • Gaui X7 - (Under Construction)
      • Synergy N5CTT - OS55 HZ-R, Bavarian Demon 3X, (Under Construction)
      • Gaui X5 Formula - XNova 4025-1100, Castle Talon 120HV ESC, Bavarian Demon 3X, MKS BLS Servos, Spin Black Belts, Optipower 6S 4300's
      • KDS Agile 5.5 - XNova 4025-1100 Motor, Castle Talon 120HV ESC, Rail 556's, Optipower 6S 5000 Ultras
      • JR Vibe 50 FBL Nitro (Retired!)


      Optifuel * Bavarian Demon * MKS Servo Tech * Optipower

      sigpic


      http://www.kaos-rc.co.uk

      Comment


      • #4
        Hey.

        In all honesty the 3G will be fine, its more than a match for the beast once setup. For most users however it's not been so plug and play if you like out the box as the beast is and so puts many off using it, but it performs just as good.

        I cannot comment on its performance on a JR heli but have them on all my Align machines and even use the tail gyro.
        .
        Ian Contessa
        Robbe SchluterUK / Midland Helicopters / Align



        Coolice Power Supplies
        Coolice Custom Built Charge Case's

        Comment


        • #5
          In the end have gone with the Align 3GX and she flies so nicely. Still a bit of engine tuning to do as fitted a brand new OS55 HZ-R, but overall really happy with it so far!
          Gavin
          • Thunder Tiger Raptor G4 FBL - OS105 HZ-R, Bavarian Demon 3SX, MKS HBL HV Servos, Reactor HVX, Optifuel SLV 25%
          • Thunder Tiger Raptor E720 FBL. Bavarian Demon 3X, (Under Construction)
          • Gaui X7 - (Under Construction)
          • Synergy N5CTT - OS55 HZ-R, Bavarian Demon 3X, (Under Construction)
          • Gaui X5 Formula - XNova 4025-1100, Castle Talon 120HV ESC, Bavarian Demon 3X, MKS BLS Servos, Spin Black Belts, Optipower 6S 4300's
          • KDS Agile 5.5 - XNova 4025-1100 Motor, Castle Talon 120HV ESC, Rail 556's, Optipower 6S 5000 Ultras
          • JR Vibe 50 FBL Nitro (Retired!)


          Optifuel * Bavarian Demon * MKS Servo Tech * Optipower

          sigpic


          http://www.kaos-rc.co.uk

          Comment

          Working...
          X