3Gx mRS Bind problems please help!

Hi all, I am trying to set up an Align 450 plus DFC which has a 3GX MRS flybarless gyro on it. I want to bind it to my Dx6i but for the life of me can not work out how to do it. I've been through manual I don't know how many times but it wont go through the binding process. I have select the model type no problem but thats it.

Any help with this one would be great.

Thanks
Dave

[coolice]

Hello mate.

I've not watched it yet but this may help

http://helidaily.com/how-to-align-3g...o-programming/
.

[coolice]

Sorry above is no good, setup only. Try these;

Align 3GX MRS Model Selection and Binding Process for Spektrum - RC Groups
.

[dbull46]

Hey Coolice thanks for the link. That one is for programming and set up which I will defo need but I did a search for binding on the same guy's channel and found this.
Once I've finished cooking dinner I'll get on it.

Thanks mate
But the way, Psu is working great Plug Plug

Dave

[dbull46]

I had a look at the 2nd link you sent me and it was just what was needed.
It explained in the video, that in order to bind the Gx Msr to a spectrum Tx you must use a satellite receiver. Then you had to plug the esc lead to the rud port and the bind plug to the pitch port and then bind in the normal way.
Worked a treat.
Thanks coolice

Dave

[coolice]

Morning Mate.

Ah great, you're very welcome.
I need to watch these myself actually, as I've not used an MRS unit to have known how to bind it.

Thanks for the PSU plug Glad you're happy with it.
.

[dbull46]

No worries mate.
Thanks again.