3gx and DSX9 question

[njl1968]

Hi,
Having problems getting my 3gx to swap from head hold to normal mode I have 2 satallites in the 3gx, and have aux 2 set to aux 2 sw, but this does not work , any suggestions please ?

[GIXERMAN]

aux2 isnt that for governor try on left hand side opposite gyro 3 position switch if i remember correctly

[njl1968]

The govenor seems to operate on the gear switch. Your correct the aux2 , seems to be a 3 pos switch LH side , but does not change the 3gx system normal to rate, obviously I am being incompente somewhere!

[tourerjim]

ive got DSX9 & 3 heli's with 3GS's & no probs setting HH so cant think where your going wrong, when the aux 2 switch is off 3GX shows green for HH when you flick switch once or twice should show red on 3rd possistion (rate mode).

[tourerjim]

aux2 isnt that for governor try on left hand side opposite gyro 3 position switch if i remember correctly

HH is aux 2 switch (left) & gov is gear switch (right)

[GIXERMAN]

The govenor seems to operate on the gear switch. Your correct the aux2 , seems to be a 3 pos switch LH side , but does not change the 3gx system normal to rate, obviously I am being incompente somewhere!

try putting pos 0 - fig pos 1 40 pos 2 60 see what does, hopefully should get different colours

[njl1968]

so in the device setting aux2 is set to aux2 sw GYR, is this correct?

[tourerjim]

Your best bet is to reset your tx then turn off all cyclic & pitch trims then setup without changing channel assignments

[njl1968]

thanks for your help will have another go tomorrow, when I am more awake!

[tourerjim]

thanks for your help will have another go tomorrow, when I am more awake!

What heli is it on or better still pm & i give you my tx setup