Tweet
Hi all im having trouble getting the gov to work right on the 3gx fitted to my trex 600 nitro
ive callobrated throttle, checked sensor, and im adjusting head speed on channel 7 on my futaba 18mz the gov is working but i seem to get all or nothing the rates in the tranny goes 0 to 100 anything over 50 cuts gov off so i use 0 to 50 on the align rce 6600 i would be about 16 to get right head speed so lower means higher speed but on the 3gx if i run 9 i get a sreaming headspeed and it goes like a rocket if i put it to say 10 or 11 i get a slower head speed but it wont pull i cant seem to get a happy medium
regards loopking
ive callobrated throttle, checked sensor, and im adjusting head speed on channel 7 on my futaba 18mz the gov is working but i seem to get all or nothing the rates in the tranny goes 0 to 100 anything over 50 cuts gov off so i use 0 to 50 on the align rce 6600 i would be about 16 to get right head speed so lower means higher speed but on the 3gx if i run 9 i get a sreaming headspeed and it goes like a rocket if i put it to say 10 or 11 i get a slower head speed but it wont pull i cant seem to get a happy medium
regards loopking
Comment