Turnigy FBL controller

[rmparry]

Dan, I think you need to reverse the gyro setting in the software and that should give you the correct response your looking for. Richie

[jasoncook]

Dan, I think you need to reverse the gyro setting in the software and that should give you the correct response your looking for. Richie

As above.
Yep a reverse button on the rudder set up page. Just check the tail direction again after you reverse it may need changing in the handset also. You will need to do the end points again.

[Downdraft]

Has anybody tried one of these on a 90 nitro yet?

Surely can't be a major problem I'd think.

[Gixxer]

Has anybody tried one of these on a 90 nitro yet?

Surely can't be a major problem I'd think.

Mine arrived today. I'm fitting it to a 700n shortly.

[debrooker]

interested to know how this performs on a nitro, as a friend wants to put one on a Knight 50

[Gixxer]

A couple of pictures of the kit and board before I fit it...

[simm0]

How much did it cost including p+p and import tax's

Craig

[Gixxer]

How much did it cost including p+p and import tax's

Craig

About $64 (£41) including postage.

I put the full value on the customs invoice but it came through without any customs charges. I guess they just felt the weight of the box and thought it was a few pennies worth.

[Downdraft]

Mine arrived today. I'm fitting it to a 700n shortly.

Best you hurry and report back with the result. I Two was thinking of fitting one to my 700n, its currently got a BeastX on an RJX head but all my other machines have Vbars on them and it would be nice to have the ability to set all of them up to feel the same.

Ill watch with eager anticipation of a good result

[chucky21022010]

Had 4 proper flight with the 450 yesterday and I love it. It might needs fine tuning as my piro is not flat. Overall, great performance for the money. My flying buddy is ordering one to try it for himself.

[Gixxer]

It just had its maiden flight on the 700n and performed flawlessly. I only took it out for a quick test to see if it would hover OK but I got carried away and went through a full tank with a big grin

The setup took about an hour but I haven't previously owned a Vbar so I wanted to make sure everything was set up right. I'm going to take it out again shortly with a laptop and make a few minor adjustments but I'm really happy with it.

I'm getting 3 more to replace the 3GX and ZYX units I have on my other flybarless helis.

What an excellent piece of kit!

[trillian]

It's gonna be raining 2nd hand BeastXs, 3GXs and ZYXs soon!

[Gixxer]

It's gonna be raining 2nd hand BeastXs, 3GXs and ZYXs soon!

I've not had a BeastX to compare it to but it's worlds apart from the 3GX.

I forgot to mention... I'm using it with 2x DSMX satellite receivers and they bound/work without a problem.

[jasoncook]

Had 4 proper flight with the 450 yesterday and I love it. It might needs fine tuning as my piro is not flat. Overall, great performance for the money. My flying buddy is ordering one to try it for himself.

Hi The one I set up flew really well the only fault I could see was that in a piro it was not flat sort of tipped the heli when it turned other than that felt fine. Looking at the pics its completely different to a mini vbar as the sensors are all mounted to the main board in a flat plain the mini vbar has them in all 3 directions.

[jasoncook]

My gau vbar had one of the sensor boards at an angle that was causing the same piro problem it was the side board that was not set at 90 degrees.