GT5 and A9 on 450 pro

[nitros]

Today arrived the gt5 that will go on 450 pro, but i will have some question about the set up.

tomorrow i will be off and i will spend all the day to try to set it up, so i will use this tread to ask the question.

my first one:
what type of swash plate do i need to choose on the radio? 90 like the v bar?

[danch]

Setup as 1 servo 90 degree

This guide may help as well as the standard manual is rubbish

http://downloads.hobbico.com/misc/tt...ary-wright.pdf

Dan

[nitros]

Setup as 1 servo 90 degree

This guide may help as well as the standard manual is rubbish

http://downloads.hobbico.com/misc/tt...ary-wright.pdf

Dan

Thanks, I will have a read tonight.
Unfortunately I don't have the original tape, do you reckon the vbar one could be good?

[danch]

Thanks, I will have a read tonight.
Unfortunately I don't have the original tape, do you reckon the vbar one could be good?

I presume so, make sure there is approx 1mm extra around the unit as recommended in the manual.

I used the tape from Maplin

Dan

[nitros]

All mounted but I got the first issue, the servo direction are correct, but when I move the Heli the swash doesn't compensate, not move to the opposite direction, the tail is fine tho

[nitros]

heli want to tilt when take off, i don't have clue what could be, some time tilt on the left some times on the right, any suggestion? Please

[danch]

possible vibrations? , does the swash tilt on the bench?

[nitros]

no on the bench is all fine,