Problems with tail gyro on Align 3G

[3dx]

Ds520 is fine at 6v

[GIXERMAN]

no dont need the step down on DS520 servo

[santomotion]

The Gear channel

That was the problem!! I was using an old set up for a Trex500 which I use with a 7ch receiver and this heli has a 6ch receiver so the gyro gain wasn´t set on "gear" on the radio... Now I´ve been able to set it up correctly, I´ll try it tomorrow.

Thanks guys!

[santomotion]

Ds520 is fine at 6v

Would the servo last longer working at a lower voltage even though it can hold 6v?

[GIXERMAN]

just leave @6v thats what it been tested at

[coolice]

Hey.

In order to meet the recommended speed and torque rating to compliemnt the FBL systems, the Aligh servos need to be run on 6 volts. The tail gyros benefit from a quick and powerful servo, so supplying the DS520 with 6 volts will allow it to work better for you.
.