Flybarless Controller for $30

[bikerflier]

I give up....

The link keeps getting changed everytime I post or edit it.

Is ehirobo a banned site or something?




Anyone up for one of these at $30
Anyone tried them?

http://*****************/shop/product_info.php?cPath=556&products_id=11109



The link keeps getting changed when I post the thread or edit it.

It's on *****************

CopterX (CX-3X1000) Flybarless 3 Axis Gyro System

Edit: Just noticed on Back order now. I know they were selling at this price, my mate ordered one Wednesday and order confirmed and tracking details sent.

[rachel]

Approved but the link looks wrong ??!

[sunny_manku1985]

Link doesn't work :-(

[bigpops]

Ehirobo.com I'm guessing, or hobbydaddy.com

The copterx cx-3x1000.

It appears to be the same system as the tarot, alzrc and helicox units. A programming box is available, and said programming box will also work with the cx-1x1000, which is a standard tail gyro.

[bikerflier]

Sorry but link keeps getting changed when I post or edit the thread.

You will have to have a look at:

EHIROBO website

CopterX (CX-3X1000) Flybarless 3 Axis Gyro System

[noddyflyer]

seems to be the same as the tarot few minor diferences ,i wonder if the programing box works with other versions (just bought the tarot version £40 for my 250se ive gone off copter x electronics )

[bikerflier]

'bigpops' post #4 above says programmer works with Tarot.

Look forward to some reports on the controller and programmer.

seems to be the same as the tarot few minor diferences ,i wonder if the programing box works with other versions (just bought the tarot version £40 for my 250se ive gone off copter x electronics )

[noddyflyer]

the unit is easy to program using tx ajusting the swash gain might be easyer with the program box the tail gain is ajusted by tx

[bigpops]

Manual link, including some pics straight out of the BeastX manual:
http://www.ky-model.com/copterx/cx-3x1000_manual.pdf

Programming box manual:
http://www.ky-model.com/copterx/cx-pb001_manual.pdf

The programming manual gives details of all the parameters you can tweak.

I don't know if the programming box will work with other versions of this FBL controller (Tarot etc.), but I don't see why it wouldn't. The hardware layout of the programmer is different to the ALZRC one, but all the features are identical.

I must say I'm tempted. I hate the way my 250 flies compared to the mCP X, and for £40 for both this and the Tarot head, I could have it running FBL and free up the GP750 that's on it for my 450 beater.

[kylelnsn]

I want to pull the trigger on this..... but does it work with DX6i as it says about non compatibility for the copterx box??

hmmmm also usb update for firmware????

[noddyflyer]

dont know about d6i but it works with my hk 7x tx . my ct6a tx wont work with my tarot unit . need a new tx so i would like to know as well its down to the accurasy of the end points the ct6a endpoints were all over the place the hk 7x has onboard programming like spectrum txs

[bigpops]

I'm guessing those transmitters that don't work with it are ones that won't let you disable CCPM mixing in helicopter mode.

I seriously doubt it won't work with a decent computer Tx like a DX6i or better. DX7 works as it's listed in the manual, along with suggested gyro gains for initial set up. There aren't enough differences between it and the DX6i that would suggest incompatibility.

[aparkin]

i own a copterx 450 great heli frame crap eletrics and i got the rtf there tx are progamable but only with computer link and with it you can change gain end points pitcha nd throtle curves but its pants bin it and get a dx7

the copterx eletrics are pants in my option i like there frames hate there electrics

[noddyflyer]

i can say the cx programer dosnt work with the tarot fbl controller it wont conect and messed up all settings (thats another servo tester to add to the pile)...mick

[sacko]

Who has bought one then?