Using 3 Axsis with Flybar!!!

[tourerjim]

Just a thought really! But why can't or why don't we use 3 axsis gyro's with flybar heli's like the Beastx for instance would that not make them even more stable?

[rapidgaz]

Y would u wAnt to


Sent from me

[stunks]

hmmmmmmmmmmmm good point but not sure at all may be someone else can answer that

[callum]

People have done this before, and is more stable.

But, It's the price of adding more gyros and wiring etc..

You can go FBL with 3x CSM 720s and a Cyclock

[andylinney]

Done it with 2 cheap gyros on a Bell 47 co-ax, made it so stable that you could put the rc down, walk over to it and shove it with a finger and it would just recover. Not much fun beyond proof of concept but it might be good for AP.

[chris jones2.4]

ive put a beastX on a 450 for some one
they are going FBL someday in the future but they bought the beast because its cheap

[Mslater]

It can be done but you'll normally find the two systems will fight each other resulting in much power loss and possibly an unstable result.

The geometry of a flybarred head is all wrong for the beast, surprised it flys at all.

[tourerjim]

ive put a beastX on a 450 for some one
they are going FBL someday in the future but they bought the beast because its cheap

Would be interesting to know how well it flys & how capable of 3D.

[tourerjim]

Some years ago I had the helicommand on 450 for about two weeks ended up selling it just did not feel right as I was already advanced in my flying but now we have the technology to convert just about any heli to FBL just can't see why cant work with flybar.
My grandson has been flying co-ax for long time now & got me thinking of training him with my spare 450 which then made me think about fitting Beastx for him & now got me thinking how well it would work with hard 3D.

[chris jones2.4]

if your looking for stability, the beast with a flybar worked very well but if your looking for 3d ability, get a saw and take the flybar off!

[tourerjim]

if your looking for stability, the beast with a flybar worked very well but if your looking for 3d ability, get a saw and take the flybar off!

Not interested in using it for 3D as I'm able to do all that with my other heli's if someone has tried it just like to know if it would 3D but I am interested in fitting Beastx & give it a go for my grandson as I'm thinking it would work poss better than the helicommand for hovering however don't want to mention it to him until I'm more sure but if it flys as I suspect it would then be cheaper & easier way of him learning on 450 size.