JR Mini-TAGS

[choppertastic]

Hi,

I've finally got my forza 450 finished which the Mini-Tags came as part of the kit after 4 months!! This is my first FBL heli and I have a wired problem that I can't seem to fathom out. If I pop the heli into a hover it holds solid. If I now put left or right rudder input in the heli yaws as expected but when it stops it hunts as though it's trying to find centre. It's not a fast wag.... I'm guessing this is just gain related but do I just up the gain in the transmitter or do I have to start to mess around with the PID stuff?

Cheers
James

[jimmyhorns]

It sounds like you have too little gain on the tail. I dont think you should need to start changing the PID stuff for a basic set up.

I cant access the 450 manual from where I am, but are there suggested settings for the Mini-Tags in there?..

[choppertastic]

Hi, my tail gain is set to 80% as recommended in the paperwork that comes with the Forza. The tags was part of the kit and is marked 'Optimised for forza 450' so I thought it would have been pretty solid out of the box. I've checked the tail control to see if theres anything sticking but it's all like silk.

[bladeboy400]

it maybe the gain, but check that the thrust bearings are correct in the tail blade grips if they are not right way round it will cause this