FuBar info needed

[tourerjim]

If i use two sats on the FuBar which port do i connect the esc wire into and how do i do the bind...?

[waveydavey]

You bind the same as V bar Jim. ESC goes into throttle channel RXC I think, will check when I get home or follow connection drawing for mini V bar

[GIXERMAN]

If you using sats use a good bec, and give a good bench test with pitch pump turned up. I ended up using a Rx .

[Raving Jim]

Throttle output is RXB for esc , RXC will also take power input .

[tourerjim]

If you using sats use a good bec, and give a good bench test with pitch pump turned up. I ended up using a Rx .

Yeah think you could be right cos i can't get the thing to bind

[Grumpy]

The rating of the bEC is highly unlikely to be causing a binding problem. The BEC rating really only shows it's head on some systems under hard servo use, not something that would be an issue during binding when you shouldnt even have servos connected.

[GIXERMAN]

Jim don't forget the wire are opposite way up to mikado Vbar.

[tourerjim]

Thanks all im all sorted now, one of my sat wire was iffy changed it and all ok.