GT5.1 on X50n TTube anyone??

[Tripler]

As Thread
If you do have the unit on your x50n could you jot down a few settings for me, I have a violent tail shake I can't get rid of, thanks

Tail P=
Tail I=
Tail D Sense= I haven't tried 0 yet as default is 10 and thought it needs some sort of D sense to make its P.I.D. calculations

Main gyro gain % (on unit)

Swash P=
Swash I=

Mounting Location and how thick are your gyro pads and if metal plate used

Thanks

[ady]

I have used several GT5 units , still do , have set several up also , I have found if I use a align tail servo , I have to turn D-sense off or the tail gets the shakes , but these have all been on electric heli's , hope this helps

[Tripler]

I have used several GT5 units , still do , have set several up also , I have found if I use a align tail servo , I have to turn D-sense off or the tail gets the shakes , but these have all been on electric heli's , hope this helps

AAAAAAAAAAhh it has an Align ds655 Tail servo on it, Could be the problem,
I will try a Futaba s9254

Thanks ady

[ady]

Try it chap , several have turned up with there rex 600 pro's n there 655 tails and GT5 , every single time they wag till D-sense is off , I use a 12 quid hobbyking tail servo , I have mine turned up now have used a BLS 251 that was fine with D-sense on , try the 655 with D-sense off first , incase it's something else as nitro vibs may also be affecting it , let us know how it goes

[Tripler]

Will do
Cheers ady

[Tripler]

Just bench tested it and it Bl**dy works with the D sense at 0 no vibes at all, just a little tail creep.
Will try it and fly it (hover) tomorrow,,
Why is this a problem with Align servo's, and as the others are ds610s will they be a problem on the cyclic's??