Announcement

Collapse
No announcement yet.

You must be joking........

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • You must be joking........

    Changed that poxy rear 55 bearing 6 weeks ago and its gone again this weekend.... WTF???? That shitey engine has been in and out more times than Ron Jeremy's dick!!! Am i lookn for a top quality bearing? thought i had brought one?? Oviously not Anybody recomend me a decent shop to purchase a decent bearing?? !!! Used OS and other manfacturers..... neither have lasted very long.... burn off fuel/exhaust bungs/close carb/stored in me living room!! wat more do i have to do, massage it with baby oil every sunday nite!!!!! Doh!!!!!! doing my heed in....... no good is it
    Velocity OS91HZ BstX FBL EDGE
    Velocity OS55HZ BstX FBL EDGE
    Align 700LE OS91 BstX FBL RadiX

    Align 600LE OS55 RadiX
    HENSELEIT 3DNT

  • #2
    get a stainless steel bearing from simplybearings.co.uk cost about 10 quid i think should be better for you
    Kel Velocity 50 sk-720 ,Fusion 50 v-bar pro 5.2 ,Velocity 90 v-bar pro 5.2 & JR DSX11 ,Phoenix and a fridge full of bottled water RCHA Courier Services PM for Details www.parcelshipper.co.uk and www.impactexpress.co.uk

    Comment


    • #3
      must be something else your doing as mine is the original bearing and had 35-40 flights and still good. Btw iam using model technics fuels and so far never changed a bearing in any of my models.
      Troll buster
      sigpic

      Comment


      • #4
        Treat the rear bearing as a consumable and don't be disappointed about its lifespan. I recommend the £2 - £3 6902 bearing from rc-bearing.

        Spending out on exotic bearing types will not be any guarantee that it will last longer. It may well make you madder in the expectation that it should of lasted longer.
        Member of Mk Heli Club



        GRAMMAR: The difference between knowing your shit and knowing you're shit!

        Comment


        • #5
          Get back on coolpower and orf optiplop! Lol!
          SCALE ROBINSON R22 WITH RAPTOR 50 MECHANICS
          FULL SIZE R22 DON'T OWN ONE JUST FLY ONE!
          FULL SIZE R44 DON'T OWN ONE JUST FLY ONE!

          Comment


          • #6
            u sure ur not running abit lean??? i had my 55 in mine running for about 3months,worked fine and was flying near enough everyday

            Comment


            • #7
              Originally posted by gashead View Post
              must be something else your doing as mine is the original bearing and had 35-40 flights and still good. Btw iam using model technics fuels and so far never changed a bearing in any of my models.
              thats good, using Optifuel 20%.............. hmmmmmmmmmmmmmm.....
              Velocity OS91HZ BstX FBL EDGE
              Velocity OS55HZ BstX FBL EDGE
              Align 700LE OS91 BstX FBL RadiX

              Align 600LE OS55 RadiX
              HENSELEIT 3DNT

              Comment


              • #8
                which model and what headspeed u running?

                Comment


                • #9
                  Originally posted by squeaky pete View Post
                  u sure ur not running abit lean??? i had my 55 in mine running for about 3months,worked fine and was flying near enough everyday
                  Well, 1. it smokes nicely 2. runs cleanly throughout rev range 3. cool as a cucumber after flight....?? am i missing anything? cheers. . .
                  Velocity OS91HZ BstX FBL EDGE
                  Velocity OS55HZ BstX FBL EDGE
                  Align 700LE OS91 BstX FBL RadiX

                  Align 600LE OS55 RadiX
                  HENSELEIT 3DNT

                  Comment


                  • #10
                    what pipe? lol

                    Comment


                    • #11
                      Originally posted by squeaky pete View Post
                      what pipe? lol
                      4. lol, outrage pipe.....
                      Velocity OS91HZ BstX FBL EDGE
                      Velocity OS55HZ BstX FBL EDGE
                      Align 700LE OS91 BstX FBL RadiX

                      Align 600LE OS55 RadiX
                      HENSELEIT 3DNT

                      Comment


                      • #12
                        I had 50 or so flights on my original os bearing, and about 60 on the SKF i put in there as a replacement and going strong, although it doesn't get used all that often. I'm running on Opti 30% SLV.....

                        Comment


                        • #13
                          5, wots for dinner! Lol!
                          SCALE ROBINSON R22 WITH RAPTOR 50 MECHANICS
                          FULL SIZE R22 DON'T OWN ONE JUST FLY ONE!
                          FULL SIZE R44 DON'T OWN ONE JUST FLY ONE!

                          Comment


                          • #14
                            what model and headspeed?

                            Comment


                            • #15
                              Originally posted by choppypilot View Post
                              5, wots for dinner! Lol!
                              Well terry funny u say, just popped a 5. Small bacon and egg quiche and sum spicey wedges in the oven mmmmmmmmmmmmmmmmm
                              Velocity OS91HZ BstX FBL EDGE
                              Velocity OS55HZ BstX FBL EDGE
                              Align 700LE OS91 BstX FBL RadiX

                              Align 600LE OS55 RadiX
                              HENSELEIT 3DNT

                              Comment

                              Working...
                              X