Announcement

Collapse
No announcement yet.

AS40 Help Needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • AS40 Help Needed

    Hi Guys, need help with an AS40, ive set the carb needle & idle adjust valves to factory defaults but still refuses to start.

    Any Please

    Cheers
    ian
    sigpic

    Sponsored by Network Rail Wage's

  • #2
    Is it definitely getting fuel?
    Is the glo plug working?
    Phil
    "Be who you are and say what you think...
    Because those that matter...don't mind...
    And those that mind... don't matter"


    Blade 130x, Park Zone Mini Sukhoi, EDF F16 thingy, some Gliders and some broken stuff

    Comment


    • #3
      Hi Mate, \Glows ok, there's no fuel getting through
      sigpic

      Sponsored by Network Rail Wage's

      Comment


      • #4
        Originally posted by Buccaneer View Post
        Hi Mate, \Glows ok, there's no fuel getting through

        No fuel=No go in my book


        Just need to see why its getting none.

        Fuel lines clear to the carb?
        Can you blow through a bit of fuel tube connected to carb?
        Phil
        "Be who you are and say what you think...
        Because those that matter...don't mind...
        And those that mind... don't matter"


        Blade 130x, Park Zone Mini Sukhoi, EDF F16 thingy, some Gliders and some broken stuff

        Comment


        • #5
          No fuel no go Lmao kinda obvious, i think the problem is the needle carb settings, i was hoping somebody on here might have a AS40 and could tell me how many turns roughly???????
          sigpic

          Sponsored by Network Rail Wage's

          Comment


          • #6
            I know you have probably done the obvious Ian, Blow back down the pipe from the carb end to the tank, Maybe something stuck in the line somewhere.

            Also try without a filter direct from the tank to the carb for the sake of getting it started for a few minutes.

            Sorry if you have already done this, Just a suggestion.

            Comment


            • #7
              Hi Tim, yeah ive sorted it out now, the factory default for the needle carb is 3 to 4 turns back, in fact its 7 to 8 turns.......... engine fire up now running a bit rough though............. i'll tweak it tomorrow.......

              Thanks for the replies

              TTFN
              Ian
              sigpic

              Sponsored by Network Rail Wage's

              Comment

              Working...
              X