Hyper 50 lean run

[sparky 2]

yes it does!! piston ring wil be on the piston or it wont run at all

Apologies need to go to spec savers there is one now the pistons out. I have cleaned the head and piston with 600 paper one of the bearings must be on its way as there is a bit of side to side on the camshaft, just waiting to pick up a locking tool to get the fan off, all new metal fan and heavy duty lining and clutch housing bearings will be getting done as well as a complete new tank. After all this will i need to treat this as a new engine to run in the new ring?

Cheers for all the help

Chris

[KevDavies]

I just run them slightly on the rich side for a couple of tanks then tune for moar powah! LOL

I use an old toothbrush as a locking tool, remove the carb and use the toothbrush handle in the crank hole to lock it

[waveydavey]

I use an insulated screwdriver wrapped with a cloth ans stoff it up the transfer hole in the crank and use the con rod to lock against it