Announcement

Collapse
No announcement yet.

Hubsan X4 Tip

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hubsan X4 Tip

    Just found this out myself so i thought i would share because it transforms this little quad...

    Generally when you try to piro ( i dont think thats the correct term when we talking about a quad but hey) the little X4 you will find it tends to drop in the direction of your command. Almost as if your also putting an aileron command in. Generally it makes the helicopter harder to handle and much more concentration is needed.
    I have discovered a way to make it piro literally on the spot. This improves the handling of the helicopter night and day and you will find circuits a sinch in your livingroom.
    This is how you do it... Try it i bet your surprised...

    Firstly power your helicopter in the normal way. TX first then plug in the battery. Wait until it links then set all of your trims to centre. So thats cyclics and rudder. You'll know they are centred because it beeps rather different to the sound it makes when your adjusting. The throttle one on the far left of the handset just set that to 0 which is all the way down.
    Next... With the throttle all the way down, press the left thumbstick down (just the same as you would push the right stick down to go into high rates to do your flips etc). With the stick pressed down move it also to the right (bottom right). Make sure you dont go too far to the right as youll find because of the curvature of the gimball the heli will begin to throttle up (we dont want this). Hold the throttle stick pressed down and to the right then also wiggle the cyclic stick from left to right a few times until you see the blue eyes on the front of the X4 blink.
    After this set your trims again so that the X4 hovers with little effort again. No need to recycle the power! Now try your rudder and look what happens! I was pleasantly surprised. It makes flyin the quad far easier and circuits in the living room are now effortless. Cant wait to do some flips with it after discovering this.
    From what i am led to believe this process resets the gyros. Youve probably red in the manual that landing for 3 seconds will help the gyros stabalise. Ive found it helped a little but doing the above makes this already awsome little quad even better again.

    Have fun!
    Last edited by Made2Fade; 19-01-2013, 10:01 PM.
    Lee
    sigpic
    www.raptoruas.co.uk
    www.lee.rcha-uk.com
    www.gensace.de

  • #2
    I have done the same with mine and the difference is amazing, i tried everything to get it trimmed but had no luck, so i went on youtube and found this out.
    I wonder why Hubsan left out this very important information in the instruction manual?
    Great little Quad though!
    Dan

    TREX 550X - Beastx HD Pro
    GOBLIN 570 - V-Bar Neo Pro

    Taranis X9D Plus

    neXt Sim

    AccruRc Sim

    Proud wearer of 3 X EGS

    Comment


    • #3
      Hubsan X4 Tip

      Just done my stepsons also, the difference is crazy. I can piro on the spot for probably a whole battery lol.
      Lee
      sigpic
      www.raptoruas.co.uk
      www.lee.rcha-uk.com
      www.gensace.de

      Comment


      • #4
        Re: Hubsan X4 Tip

        I will try this, mine is not stabble at all, was thinking there was something wrong with it. Thanks.

        Comment


        • #5
          Hubsan X4 Tip

          Youll be very surprised!
          Lee
          sigpic
          www.raptoruas.co.uk
          www.lee.rcha-uk.com
          www.gensace.de

          Comment


          • #6
            It is a neat tip,if you find somewhere dead level with a spirit level it will piro on the spot!
            T- rex 600n V-bar
            Logo 550sx V-bar
            Logo 600sx V-bar
            Logo 600sx V-bar night flyer

            VBControl, but not the gay white version as i'm simply not gay enough to pull it off!

            Comment


            • #7
              Originally posted by Made2Fade View Post
              Just found this out myself so i thought i would share because it transforms this little quad...

              Generally when you try to piro ( i dont think thats the correct term when we talking about a quad but hey) the little X4 you will find it tends to drop in the direction of your command. Almost as if your also putting an aileron command in. Generally it makes the helicopter harder to handle and much more concentration is needed.
              I have discovered a way to make it piro literally on the spot. This improves the handling of the helicopter night and day and you will find circuits a sinch in your livingroom.
              This is how you do it... Try it i bet your surprised...

              Firstly power your helicopter in the normal way. TX first then plug in the battery. Wait until it links then set all of your trims to centre. So thats cyclics and rudder. You'll know they are centred because it beeps rather different to the sound it makes when your adjusting. The throttle one on the far left of the handset just set that to 0 which is all the way down.
              Next... With the throttle all the way down, press the left thumbstick down (just the same as you would push the right stick down to go into high rates to do your flips etc). With the stick pressed down move it also to the right (bottom right). Make sure you dont go too far to the right as youll find because of the curvature of the gimball the heli will begin to throttle up (we dont want this). Hold the throttle stick pressed down and to the right then also wiggle the cyclic stick from left to right a few times until you see the blue eyes on the front of the X4 blink.
              After this set your trims again so that the X4 hovers with little effort again. No need to recycle the power! Now try your rudder and look what happens! I was pleasantly surprised. It makes flyin the quad far easier and circuits in the living room are now effortless. Cant wait to do some flips with it after discovering this.
              From what i am led to believe this process resets the gyros. Youve probably red in the manual that landing for 3 seconds will help the gyros stabalise. Ive found it helped a little but doing the above makes this already awsome little quad even better again.

              Have fun!

              Thanks for sharing that information, we will try it out!

              Comment


              • #8
                That is well worth knowing - mine piros terribly badly - bu**ers off backwards and in the direction of the piro - will try this tomorrow.
                Thanks!
                Trev
                Lots of different things that fly

                And happy to have FOUR shiny EGS

                Comment


                • #9
                  You guys are in for a treat
                  T- rex 600n V-bar
                  Logo 550sx V-bar
                  Logo 600sx V-bar
                  Logo 600sx V-bar night flyer

                  VBControl, but not the gay white version as i'm simply not gay enough to pull it off!

                  Comment


                  • #10
                    Oh sweet, cant wait to do mine

                    Thanks Lee
                    + 7 x Eddies finest EGS's


                    Comment


                    • #11
                      like this?

                      Raptor 30v2
                      Skya 500 x 2 one to be Scale Bo 105
                      Copter X450 x 2
                      Trex 250 x 2
                      Mcpx
                      Raven wing.
                      Suhkoi
                      Anx Floater
                      Radjet 800


                      DX7
                      Phoenix v4

                      Proud to be member of SCHA

                      Log Cabin for Hire in Snowdon.


                      http://www.youtube.com/user/streetlu...s?feature=mhee

                      Comment


                      • #12
                        This may help also.

                        Raptor 30v2
                        Skya 500 x 2 one to be Scale Bo 105
                        Copter X450 x 2
                        Trex 250 x 2
                        Mcpx
                        Raven wing.
                        Suhkoi
                        Anx Floater
                        Radjet 800


                        DX7
                        Phoenix v4

                        Proud to be member of SCHA

                        Log Cabin for Hire in Snowdon.


                        http://www.youtube.com/user/streetlu...s?feature=mhee

                        Comment


                        • #13
                          wow cant belive the difference ,,,thx guys

                          Comment


                          • #14
                            Hubsan X4 Tip

                            Now you should be able to flip it in the livingroom too
                            Why the heck this was not posted in the manual ill never know. Ive just heard that it will be printed in the future though. Have fun this thing really comes alive now.
                            Lee
                            sigpic
                            www.raptoruas.co.uk
                            www.lee.rcha-uk.com
                            www.gensace.de

                            Comment


                            • #15
                              Re: Hubsan X4 Tip

                              Just done mine, and its totally different now, it will actually fly like my mqx.

                              Comment

                              Working...
                              X