Blade 350qx not holding

[Rowey]

After having a half dozen or so incident free flights my 350 has started to oscillate while attempting to hold position in smart mode. Although it's not severe it's bloody annoying, especially as it has never been knocked. All thoughts and advice appreciated

[tomatwalden]

Try the calibration steps ?

blade 350qx calibration - YouTube

[iceuk]

I would send it back to horizon hobby, why should you have to deal with a fault after less than 10 flights, you never know they might
Even replace it with the V2 model.

[tomatwalden]

Just another thought, have you checked the props are ok? Take a close look at the rotor hubs to make sure there's no cracking. Perhaps ask Pete at Phoenix to see if he can spot anything obvious ... He's pretty used to dealing with quads.


Sent from my iPad using Tapatalk

[liambaker996]

If it's been in the last few days there is a lot of solar flares about.....
So anything with gps won't be very good at all tbh


Sent from my iPhone using Tapatalk

[Rowey]

Thanks for the advice and the interesting comment re solar flares,it is definetly annoying when things go wrong . sending it back is gonna be a ball ache as I mutilated the original packing and re fitted it into a hard case (costly to post) I will try the recalibrations and report back .

[Rowey]

Quick compass calibration and all seems to be good, thanks again for advice