DJI Phantom 1 Can-bus addition

[Davy Crockett]

Hi folks
bought a phantom 1 described as latest version, has naza v2 board and compass on rear right leg.

I asked when I bought it would it take iOSD and the answer was yes... However, bit of inspection and reading there is no can-bus port for the iOSD to plug into.

seen a few posts and YouTube vids and it seems that I have to purchase a v2 PMU and do a bit of modding to get it to work

thought I'd ask here to see if anyone has got this to work and how they did it

thanks for reading and I welcome any advice

[rmparry]

I have not done this myself but you are right you will have to purchase the v2 pmu and if using a gimbal will probably need to get the v2 gcu as well

hope this helps