Announcement

Collapse
No announcement yet.

Help needed

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Help needed

    Pheonix v3 and dx8

    I cant get the throttle sorted. Rotor starts to spin at half throttle and goes flat out, when stick moved to max it will sit on ground with out rapid take off. Have tried reversing servo, still no joy, done all calibrations. It seems to be uncontrolable on the throttle stick.

    Paul
    Tags: None
  • #2
    Have a look at the servo monitor on your DX8, see what the channels is doing. If that is moving the way it should look at the controller in Phoenix.
    The pitch have to move with the throttle to get it working.

    Thanks Nico

    Comment

    • #3
      Originally posted by nicobec View Post
      Have a look at the servo monitor on your DX8, see what the channels is doing. If that is moving the way it should look at the controller in Phoenix.
      The pitch have to move with the throttle to get it working.

      Thanks Nico
      Nico,
      Throttle and pitch are moving together -100% to 100% if that helps at all.
      Paul

      Comment

      • #4
        throtel and pitch should as a starting point be 0 25 50 75 100 and work from there b carefull that your pitch is not reversed because if you have head speed and you pull stick back it will lift off been there done that
        Sent from my GT-I9100 using Tapatalk

        Comment

        • #5
          Originally posted by paul f View Post
          Nico,
          Throttle and pitch are moving together -100% to 100% if that helps at all.
          Paul
          Is that on the DX8 or on Phoenix? if on dx8 try to re set-up the controller.

          Comment

          • #6
            Originally posted by nicobec View Post
            Is that on the DX8 or on Phoenix? if on dx8 try to re set-up the controller.
            Yeah thats on the dx8 after reseting model on tx(back to heli default settings).
            Paul

            Comment

            • #7
              Remove the controller on the sim and set ip up again. make sure the flight mode is correct and the t hold is not ON on the DX8.

              Comment

              • #8
                Originally posted by paul f View Post
                Pheonix v3 and dx8

                I cant get the throttle sorted. Rotor starts to spin at half throttle and goes flat out, when stick moved to max it will sit on ground with out rapid take off. Have tried reversing servo, still no joy, done all calibrations. It seems to be uncontrolable on the throttle stick.

                Paul
                I had this same issue on first use. My problem was that the dx7s I have was still set to plane mode ;-/ but also the servo setting was set to use 3 instead of one at 90'

                Once the server config was correct, I could then configure the dx correctly in the Phoenix radio setup.

                Comment

                • #9
                  Hey

                  With my DX8 I followed bolders setup guide for the DX6i. If you search phoenix dx6i setup it will come up then just scroll down to the post. Mine works a treat.

                  Hope this helps

                  Rich

                  Click Here and scroll down. This will get you started
                  Last edited by Rich23; 18-05-2012, 09:32 AM.
                  SAB Goblin 700C - Black Nitro
                  NEO,Kosmik, OS105, MKS, Cyclone
                  V-Control
                  Flight Log
                  THE MEDWAY MASSIVE
                  WEBSITE FACEBOOK

                  Comment

                  Previous template Next
                  Working...
                  X