Tweet
I bought a Synergy N5c Canopy in the fast lads sale to fit on my N5,from looking online I found out I have to move the rear posts 17mm forward which shouldn't be a problem.I have ordered the front canopy post from N5c as you also need these,the more tricky bit is repositioning and drilling the hole for the front mounting post,I wondered if someone had a N5c frame lying around they could take some dimensions off,say from bottom of the frame where landing gear goes to centre of the canopy mounting hole and from front of frame to centre of hole.Think this will be less hit and miss than trying to mark it off the canopy and I can mark these dimensions on the frames and check with the canopy on they line up before drilling.