Ely Q 90 has arrived :D

[Planehazza]

What electronics will you lot be using?

[squeaky pete]

mine will have jr8915s on cyclics, ely q reg, ar7100, ys91sr with a black short gp exhaust, spartan/ds650 on the tail, gonna run stock paddles and tails with 690 radix stickbangers

[Planehazza]

mine will have jr8915s on cyclics, ely q reg, ar7100, ys91sr with a black short gp exhaust, spartan/ds650 on the tail, gonna run stock paddles and tails with 690 radix stickbangers

Yikes! One of those servos will cost the same as three of what I'll be getting! Lol

Oh well, love align live align

[squeaky pete]

lol i had them already altho, was quite tempted to try the outrage servos

[moonmanflyer]

Jr8915's on the cyclic, ds650 on the tail, csm720 or align gp750 gyro, have both but not decided which. Ys91sr with Hartori pipe, blades likely to be either torsion or radix. Have all the kit already, just need the airframe to fit it all in

[simm0]

guys do me a favour please

when you are building,post some pics please

cheers craig

[squeaky pete]

will do post up some tonight

[rspblake]

Lol,

Flybarless head is a few weeks away..

Site sorted.. Kits in-stock.

Looking nice in the box..

Pete.. see you soon.. if you have a late one you can have it built and flying in the snow..

[Tim Procter]

Yikes! One of those servos will cost the same as three of what I'll be getting! Lol

Oh well, love align live align

ds610's are fine Harry and run @ 8v if needed.

[Planehazza]

ds610's are fine Harry and run @ 8v if needed.

8v? That's a canny increase over the max rated 6v isn't it?

Cheers, I was just wondering if they were torquey enough.

[millerman]

8v? That's a canny increase over the max rated 6v isn't it?

Cheers, I was just wondering if they were torquey enough.

i run 610's via an ar7100r on my velo 90 and 700n both are flybarless and i have no probs at all really dont see the point in spending more on servos when the 610's can do it no probs

[millerman]

just read the write up on the ely q90 and it says they give you the choice of head and dont include it with the kit whilest this is a very good idea anybody wanting a flybarless head is outa luck as they arnt available and if you want one a new kit that is, then you have to buy the flybared head and then the flybarless head later not very revolutionary as they put it in the write up

[squeaky pete]

that be correct, handy if your trash the heli and not the head rob, ill be home soon, so get your arse round and hopefully if its a snow day tomorrow then i should be ready for a test flight, dont forget the blades dude

[Planehazza]

just read the write up on the ely q90 and it says they give you the choice of head and dont include it with the kit whilest this is a very good idea anybody wanting a flybarless head is outa luck as they arnt available and if you want one a new kit that is, then you have to buy the flybared head and then the flybarless head later not very revolutionary as they put it in the write up

Well not really a big deal if you ask me. By tr time you've built it and set it all up, the fbl head will have arrived. As long as you have the servo and swash geometry correct, it will just be a case of adding the head and blades at 0 def and then programming the fbl unit. it's likely what I'm going to do

[millerman]

guess so !!
glad its not an align kit cause folks would be kicking them down for bringing out a model and only offering 1 of the 2 heads for it on release
do you see where im comming from though i think i have a point