Tweet
Hi again,
In the middle of my Trex 600e pro build and I have to say I am becoming increasingly frustrated with the CONFUSING instructions. At the stage of installing the servos, should be no problem but as I said the pictures in the manual do not make it clear. The DS610 servos x3 have the metal CNC arms. The screws to attach them are not clear. Also the DS650 tail servo. In the illustration it shows a single servo arm with three holes in. Well I have four servos and only three arms. What I do have though is four packs of servo star arms and round ones. Again, no M2 nut to fasten and parts that I do not have a clue where to place.
For a £550 kit the instructions are RUBBISH and I fear never finishing the build.
If I can't install a servo what chance do I have to install the gyro, esc, bec.
Had enough
In the middle of my Trex 600e pro build and I have to say I am becoming increasingly frustrated with the CONFUSING instructions. At the stage of installing the servos, should be no problem but as I said the pictures in the manual do not make it clear. The DS610 servos x3 have the metal CNC arms. The screws to attach them are not clear. Also the DS650 tail servo. In the illustration it shows a single servo arm with three holes in. Well I have four servos and only three arms. What I do have though is four packs of servo star arms and round ones. Again, no M2 nut to fasten and parts that I do not have a clue where to place.
For a £550 kit the instructions are RUBBISH and I fear never finishing the build.
If I can't install a servo what chance do I have to install the gyro, esc, bec.
Had enough
Comment