Looks like the 550/600 DFC are in the UK

[PilotPhil]

ok thanks, so only parts needed are the two parts required? if its lower wont the anti rotation bracket be close to fouling the blades?

also how does it sit lower if its on the same shaft?

going to get this as hugely concerned about the ball cups popping off in flight.

[Nick B]

10mm shaft just shorter.

Will stick a side on piccie up when fitted,the 600 Pro looks so sleek from the side with its lower head design,the 550 looks too tall.

You are thinking like me lol,my 550 is my smallest but also my tallest!

[Planehazza]

ok thanks, so only parts needed are the two parts required? if its lower wont the anti rotation bracket be close to fouling the blades?

also how does it sit lower if its on the same shaft?

going to get this as hugely concerned about the ball cups popping off in flight.

You got them on right? A on the outside?

[Nick B]

Come on postman!!!!!!!!!!

[PilotPhil]

You got them on right? A on the outside?

Sure have, its the balls, the 3mm ones are useless, bought more 4mm balls all round the FBL head now so will keep them inplace better.

[stunks]

got my 600 dfc head this morning and i have fitted and tested it and its all good to go!!

[jamiem]

Mine will be here tomorrow

[Planehazza]

Mine will be here tomorrow

Pictures fitted when it arrives or you're banned

[PilotPhil]

got my 600 dfc head this morning and i have fitted and tested it and its all good to go!!

pictures pweeeease!

[stunks]

IMG_0754[1].jpgIMG_0755[1].jpgIMG_0756[1].jpgIMG_0757[1].jpgIMG_0758[1].jpg on the tail am running the 105mm tail blades and its good to go

[Planehazza]

Cheers stunks, looking good!

[jamiem]

I'll get some photos and a video either tomorrow or Sunday

[ChrisB]

Mine is currently rattling aroun in a UPS van in Poole,he normally comes around our way mid afternoon.

[PilotPhil]

[ATTACH=CONFIG]36420[/ATTACH][ATTACH=CONFIG]36421[/ATTACH][ATTACH=CONFIG]36422[/ATTACH][ATTACH=CONFIG]36423[/ATTACH][ATTACH=CONFIG]36424[/ATTACH] on the tail am running the 105mm tail blades and its good to go

oh yes im having one of those....

[PilotPhil]

I notice your running without the plate ontop of the head, is there any reason why I should keep mine on? or will I be safe removing it and making it look cleaner