Hi all, I want to get a Tachometer so I can measure the speed of main blades on my Raptor 30. I am after some recommendations from you as to which one I should get be it new or 2nd hand. Thanks Dave
Announcement
Collapse
No announcement yet.
Tachometer
Collapse
X
-
I bought the turnigy from ebay £13.99 delivered ...cheap and cheerful but works well for two to nine blades and records the highest speed
$(KGrHqNHJC0E-P7m8qEBBPuo5oZMdg~~60_35.jpgMurg
Trex 700 N Vortex
Trex 600 Helixheli GT15 HZ Gasser Vortex
MCPX v2 x2
DX8
Phoenix sim
PL 6
-
this is not designed for helis its more for planes .I wouldnt want to stand over my helis trying to get the head speed with that.this one has had some good reviews Turnigy LCD Tachometer for Helicopter 800~4200RPM (UK Warehouse)
Originally posted by Bikermurg View PostI bought the turnigy from ebay £13.99 delivered ...cheap and cheerful but works well for two to nine blades and records the highest speed
[ATTACH=CONFIG]57482[/ATTACH]Trex 550e dfc :-)
Sab Goblin 500 Sport/dx8 and 9
t-rex 450s x2 /Raptor 50
blade 130x 3off/mcpx x2 180cfx times 2
multiplex acromaster 3d (great fun) acrowot,sonic wing,Graupner junior 2mtr glider,beast biplane .
kyosho spree small plank
bogey combat plank x2 woop
http://www.cuffleymfc.co.uk
brian OB2proud owner of 3X E.G.S+ 1boggy special star

Comment
-
Would you stand over a heli with any tacho when the blades are at high speed...no
Does it tell you the rpm of the blades....yes
used a bit of common and strapped it to the boom pointing up and it recorded the highest speed.
is it suitable for use on a heli...yes.Murg
Trex 700 N Vortex
Trex 600 Helixheli GT15 HZ Gasser Vortex
MCPX v2 x2
DX8
Phoenix sim
PL 6
Comment
-
dont be stupid no one stands over a heli with a taco. you hover the heli and get someone to eye up the taco .use your common sense .you will only find the true speed when the heli is in the air.normal,idle up 1 and idle up 2 at zero pitch while in the air will give the true speed.
Originally posted by Bikermurg View PostWould you stand over a heli with any tacho when the blades are at high speed...no
Does it tell you the rpm of the blades....yes
used a bit of common and strapped it to the boom pointing up and it recorded the highest speed.
is it suitable for use on a heli...yes.Trex 550e dfc :-)
Sab Goblin 500 Sport/dx8 and 9
t-rex 450s x2 /Raptor 50
blade 130x 3off/mcpx x2 180cfx times 2
multiplex acromaster 3d (great fun) acrowot,sonic wing,Graupner junior 2mtr glider,beast biplane .
kyosho spree small plank
bogey combat plank x2 woop
http://www.cuffleymfc.co.uk
brian OB2proud owner of 3X E.G.S+ 1boggy special star

Comment
-
I've one of these and it works well. I found the easiest way of using it is to hold it up quite close to your eye to exclude as much light as possible, especially on a bright day (if you're ever fortunate enough to be out flying on one that is!)Originally posted by brin View Postthis is not designed for helis its more for planes .I wouldnt want to stand over my helis trying to get the head speed with that.this one has had some good reviews Turnigy LCD Tachometer for Helicopter 800~4200RPM (UK Warehouse)
Comment

Comment