Tweet
Hi All.
So after messing around trying to get my Vbar Gov to spool up just cant get it to spool up slow enough.
So I though why not set the ESC to soft start and use the Gov in the Vbar at least thinking I was going to lose the Anti rotation bailout function in Vbar. Well seems to work. Not sure it is how it is meant to but is a work around that appears to work.
So current setup is ESC set to soft start, Gov on in Vbar max head speed 2700.
Normal mode 0,90,90,90,90 with a measured head speed around 2250 rpm
Idle one 95,95,95,95,95 with a measured head speed 2450 rpm Should be close to what I am used to.
Idle two 55,55,55,55,55 for Auto rotation bailout practice with a idle speed of 850 rpm
So when I go to idle 2 head speed drops enough to practice auto rotations but if I want to bail out and flick back to idle 1 I get back to 2450 RPM within 4 seconds. So this speed is obviously above the Align ESC soft start and spools up fairly smooth from the low head speed I assume by the vbar Gov.
Maybe the the correct way to get the result but as far as I can tell this is the exact result Vbar try and get with there bail out function.
So all appears good on the bench with no blade. Will give a run tomorrow and see how we go.
Cheers
So after messing around trying to get my Vbar Gov to spool up just cant get it to spool up slow enough.
So I though why not set the ESC to soft start and use the Gov in the Vbar at least thinking I was going to lose the Anti rotation bailout function in Vbar. Well seems to work. Not sure it is how it is meant to but is a work around that appears to work.
So current setup is ESC set to soft start, Gov on in Vbar max head speed 2700.
Normal mode 0,90,90,90,90 with a measured head speed around 2250 rpm
Idle one 95,95,95,95,95 with a measured head speed 2450 rpm Should be close to what I am used to.
Idle two 55,55,55,55,55 for Auto rotation bailout practice with a idle speed of 850 rpm
So when I go to idle 2 head speed drops enough to practice auto rotations but if I want to bail out and flick back to idle 1 I get back to 2450 RPM within 4 seconds. So this speed is obviously above the Align ESC soft start and spools up fairly smooth from the low head speed I assume by the vbar Gov.
Maybe the the correct way to get the result but as far as I can tell this is the exact result Vbar try and get with there bail out function.
So all appears good on the bench with no blade. Will give a run tomorrow and see how we go.
Cheers
