Tweet
i have just got hold of a damaged Rapier 450 RTF, with their transmitter with the dip switches.
The setup is as originally purchased by the previous owner who crashed it.
I am confident i can fix it if I can get hold of the information needed to assist me.
When I got hold of it, the transmitter dip switches were all set wrong, the information, what it is worth from CMLdistributors, told me the correct dip switch position but that is all.
Can any one guide me to the function of the dip switches, one of the servo's moves full travel and I can not identify which switch to trip to correct it.
Most of what I can see has been fiddled with and I am not suprised it crashed, unless all these changes have been made in the hope of getting it to fly.
The servo that is plugged into the gear socket, moves fully one way and stays there.
There is loads more wrong but I want to tackle one at once.
A full setup manual would be great but have not found one yet, the distributor says they are not available as it is a RTF model.
Thanks foir readig this
The setup is as originally purchased by the previous owner who crashed it.
I am confident i can fix it if I can get hold of the information needed to assist me.
When I got hold of it, the transmitter dip switches were all set wrong, the information, what it is worth from CMLdistributors, told me the correct dip switch position but that is all.
Can any one guide me to the function of the dip switches, one of the servo's moves full travel and I can not identify which switch to trip to correct it.
Most of what I can see has been fiddled with and I am not suprised it crashed, unless all these changes have been made in the hope of getting it to fly.
The servo that is plugged into the gear socket, moves fully one way and stays there.
There is loads more wrong but I want to tackle one at once.
A full setup manual would be great but have not found one yet, the distributor says they are not available as it is a RTF model.
Thanks foir readig this