What did the postman bring today?

[bigbladelittleblade]

I couldn't wait for the postman, so I went to Fast Lads this afternoon and picked up one of these below, happy days

[Rotorwheels]

Received all the electrics for the G570 in the post this morning, can't wait to get it all thrown in

I couldn't wait for the postman, so I went to Fast Lads this afternoon and picked up one of these below, happy days

Very Nice! Could I be a right pain? Could you check what size tail belt tensioner yours came with. According to the manual it's meant to be the 7mm wide one, but mine came with the 4mm. Also, check your blades if you bought it with them, mine weren't too pristine either.

[goldslinger]

yahooooo the posty brought me my Blade 450X yahoooooo all I've got to get now is the transmitter fixed and sky's the limit
he also brought me a transistor or my SH8830 circuit board so I will have that helli to play with first

[Rich23]

Today I received 2x Turnigy 6S 5000mAh 40c Li-Po's. Now I get to have 2 flights with the Goblin instead of just 1 . First time ordering such big packs both had 54% and the balance seems good with one at 0.004 out across the cells and the second 0.003 out across the cells. Will check the ohms once I have soldered EC5's on and put them through their first charge.
IMG_3028.jpg

Rich

[goldslinger]

Just to be different I gave the postman some thing my DX6i for repair

[NiceBlades]

Some Rjx 520mm blades from Adie at hobby hangar for my goblin 500!

[Tumbledown]

I recieved a Blade MCPX from the postie today, my first venture into the world of CP. I then promptly broke the swash plate whilst setting it up! So he will be bringing me a new swashplate soon. I promise to keep him in a job

[DK 2.0]

Well I got a parcel today nothing major just some new tail fins straight from Fusuno

[Mike Sanders]

New tail servo and yet more tail gears for my 130X. Thanks Kyle. Lightning service.

[bigpops]

Got the Kylin quick release canopy mounts for the agile.

Unfortunately, there's a rear post missing, and the one that is there is a stock agile post, not one for these mounts.

[bothma]

A new tank for my Velo N2, now comes the task in fitting it.....

[glenflyer]

Pl 6 charger combo :-)

[TomasMan]

New dfc head for my 450 Can't wait to fly it.
20140612_101129.jpg

[carpwally]

My Futaba T10CG from Futaba UK after being repaired with a broken gimbal on throttle control could have ended in tears(mine) LOL!

[bigpops]

Agile 5.5 came yesterday. Got the frame together. What a nicely made kit. Easily as good, if not better made than my goblin 500 kit I had.