Futaba query

[Milamber]

Good Evening all,

I have come up with a Futaba 9c super, absolutely brand new and unflown. I have added a 2.4 GHz FASST module and everything works fine *except* for Throttle Hold and/or Throttle cut. Is there some secret to this? Switch G, by default, is for Throttle Hold and offers only + or - 50% around some point or another. As it needs servo reverse to correctly control an ESC, the +50% when added as Throttle Hold brings the power back to about 25%, but does not stop the motor. JR and Spektrum are just so easy to configure and this Futaba is driving me absolutley NUTS. Any assistance gratefully received. Thanks in anticipation.

M.

[dav20043]

check that it is enabled as by default there not

[electricsceadu]

as said throttle hold on the 9c is inh from new, you need to turn it on
it will tell you in the manual
if you can find it i'll look at my old radio later for you

[electricsceadu]

go to the advance menu
push mode/page button twice from the front screen
go to thr-hold
press the big button
turn from inh to off/on
set the % at which you wish the hold to be
exit

[xygax]

ohhh and turn off the revo mixing its evil and enabled by default... !

Steve

[Disc]

ohhh and turn off the revo mixing its evil and enabled by default... !

Steve

Yes it is Evil your right there!

Bloody thing caught me out a few times !

[Milamber]

go to the advance menu
push mode/page button twice from the front screen
go to thr-hold
press the big button
turn from inh to off/on
set the % at which you wish the hold to be
exit

Thanks to each of you for your responses. Specifically concerning the quoted response, the default switch G is inhibited when pointing to the rear of the case and shows:

[THR-HOLD]
MIX>OFF
POSI> Same number as alternative position ie switch G to front of case.

Alternative position ie switch G to front of case

[THR-HOLD]
MIX>ON
% is variable from +50 to -50 and Power Lamp [red] blinks

This all seems correct, but doesn't cut the motor off [hold]

Rudder Offset [Revo Mix] is OFF by default.

Thanks again.

Maurice.