Tweet
Hey
I have a 14sg, R7008sb working with a gpro. the gpro is connected to the rx via sbus. and obviouly the cc esc is connected to the gpro.
So looking at the castle telemetry link, it shows in the manual to connect one connector coming out the link to the sbus 2, and then the other cable to "external input".
So does this go to the gpro as normal? so all you have to do to fit this thing is pull the cable out the gpro, and plug it into the link, then connect one wire back to the gpro and the other to the sbus2 port on the rx, then bang its all working and will show up on the 14sg?
Kr
Craig
I have a 14sg, R7008sb working with a gpro. the gpro is connected to the rx via sbus. and obviouly the cc esc is connected to the gpro.
So looking at the castle telemetry link, it shows in the manual to connect one connector coming out the link to the sbus 2, and then the other cable to "external input".
So does this go to the gpro as normal? so all you have to do to fit this thing is pull the cable out the gpro, and plug it into the link, then connect one wire back to the gpro and the other to the sbus2 port on the rx, then bang its all working and will show up on the 14sg?
Kr
Craig